LG Electronics Vacuum Cleaner V CP243NDG RTS User Manual

V-CP243NDN / NTN  
V-CP243RDN / RTN  
V-CP243NDG / RTS  
E
S
S
N
D
English  
Svenska  
Suomen kieli  
Norsk  
Dansk  
 
13  
11  
12  
10  
V-CP243NDN/NTN/NDG  
16  
13  
14  
15  
V-CP243RDN/RTN/RTS  
17  
19  
18  
21  
22  
20  
 
3 –  
E
Using the cleaning head and Accessory  
Information for your safety  
Nozzles (depending on model)  
Fit the large cleaning head onto the end of  
the tube.  
Please read all the following information,  
which contains important instructions for the  
safety, the use and the maintenance of the  
appliance.  
This appliance complies with the following EC  
Directives: -73/23/EEC, 93/68/EEC-Low  
Voltage Directive-89/336EEC -EMC Directive.  
The 2 position head(7) is equipped with a  
pedal(8) which allows you to alter its  
position according to the type of floor to be  
cleaned.  
Hard floor position(tiles, parquet  
floors...). Press on the pedal to lower the  
brush.  
Never allow children to use the appliance  
unsupervised.  
Carpet or rug position. Press on the  
pedal to lift the brush up.  
Do not use the appliance If the supply  
cord is damaged or faulty.  
Crevice Tool(9)  
If the mains lead is damaged, it must be  
replaced by an approved LG Electronics  
Service Agent in order to avoid a hazard.  
For vacuuming in those normally inaccess-  
ible places i.e. reaching cobwebs, or down  
the side of a sofa!  
Always switch the vaccum cleaner off  
before :  
changing the dust bag.  
Dusting brush(10)  
For vacuuming picture frames furniture  
outlines, books and other uneven objects.  
changing or cleaning the filters.  
Upholstery Nozzle(11)  
If no dustbag is inserted, the cover cannot  
be closed. Please do not use force!  
For vacuuming uphostery, mattresses, etc.  
The thread collectors help to pick up the  
threads and fluff.  
Do not vacuum flammable or explosive  
substances(liquids or gases).  
How to plug in and use  
Pull out the supply cord to the desired  
length and plug into the socket.  
Do not vacuum hot ash, embers etc. nor  
sharp objects.  
Do not vacuum water or other liquids.  
Press button (13) to start the vacuum cleaner.  
To stop it press the button (13) again.  
How to Use  
Adjusting the power level  
If your appliance is equipped with an  
electronic variable power control(13), you  
can choose the power appropriated for the  
task. (depending on model)  
Connecting the flexible hose  
Push the end of the head(1) on the flexible  
hose(2) into the attachment point on the  
vacuum cleaner.  
To remove the flexible hose from the  
vacuum cleaner, press on the button(3)  
situated on the head, then pull upwards.  
The flexible hose handle(14) has a manual  
air flow regulator(15) which allows you to  
briefly reduce the suction level.  
Storage(16)  
Assembling the tubes  
(depending on model)  
Metal or plastic tube(4)  
- Fit together the two tubes by twisting  
slightly.  
When you have switched off and unplugged  
the appliance, press on the button (12) to  
automatically rewind the cord.  
You can move or store your appliance in a  
vertical position by sliding the hook on the  
large cleaning head into the clip on the  
underside of the appliance.  
Telescopic tube(5)  
- Push spring latch(6) forward.  
- Pull out tube to required length.  
- Release spring latch to lock.  
 
4 –  
E
Changing the dust bag  
What to do if your appliance  
does not work?  
The dustbag needs changing when the cleaner  
is set to maximum power and the cleaner head  
is off the floor but the bag fullindicator  
window(17) is completely coloured red.  
Check that the appliance is correctly plugged  
in and that the electrical socket is working.  
Even if the dustbag does not appear to be  
full at this stage, it should be changed.  
It could be that a great deal of very fine dust  
has clogged up the pores of the dust bag.  
What to do when the suction  
performance reduces?  
Turn off the appliance and unplug it.  
Open the cover by pressing the hook(18)  
and lifting it up until it snaps into place.  
Stop the appliance and unplug it.  
Check that the tubes, flexible hose and  
cleaning tool are not blocked.  
Your appliance is equipped with either a  
paper dust bag (19) or a fabric dust bag  
(21)(depending on model).  
Check that the dust bag is not full.Replace  
if necessary.  
Take hold of the dust bag by the handle  
and pull.Remove the bag and throw it  
away.  
To refit a new bag push the cardboard  
support of a new bag into the bag mount  
(20)until it will go no further.  
If your appliance is fitted with a fab-  
ric dust bag follow the same instructions  
as above.  
Empty it and replace it(21).  
Note: as the appliance is fitted with a safety  
device which checks that the bag is in place  
you cannot close the lid if the bag is not  
fitted correctly.  
Cleaning the motor filter  
The motor filter is situated inside the  
appliance between the dust bag and the  
motor. Each time that you change the air  
outlet filter we advise you to remove the  
motor filter(22)and to clean it by tapping to  
remover the dirt and then replacing it in the  
vacuum cleaner.  
 
5 –  
MEMO  
 
14 –  
MEMO  
 
15 –  
P/No.: 3828Fi2841K  
 

Krown Manufacturing Clock WakeMEup User Manual
Lenovo Computer Hardware Q180 User Manual
Lexus Automobile RX400h User Manual
Liebert Power Supply Series 610 User Manual
Linak Automobile Parts Linear Actuator Technology User Manual
Lincoln Electric Power Supply SVM112 B User Manual
Lindy Network Card 42982V0 User Manual
Martin Audio Portable Speaker F12+ User Manual
Marvel Industries Refrigerator 6ORDE User Manual
Melissa Vacuum Cleaner 640 108 User Manual