Product specifications
PG58 Cardioid Dynamic Vocal Microphone
Overview
The PG58 Dynamic Vocal Microphone is a professional quality microphone designed to be used in lead and backup vocal performance applications.
With rugged durability and excellent sound, the PG58 comes with an on/off switch, swivel adapter, carrying pouch and choice of XLR cable, QTR ( ¼”)
cable or without cable.
Features
•
•
Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in
high volume settings.
•
•
•
•
•
•
•
•
Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
Cartridge includes a neodymium magnet for high output level.
Internal shock mount for reduced handling noise.
Durable metal construction.
On/off switch for onstage control.
Hardened steel mesh ball grille that resists wear and abuse.
Integral “pop” filter reduces explosive breath sounds and wind noise.
Includes 15ft (4.57m) cable, break-resistant mic clip and storage bag.
Available Models
PG58-QTR
PG58-XLR
PG58-XLR
PG58BTS
Includes a 15 ft (4.57m) XLR to 1/4“ Cable, Microphone Clip, 5/8“ to 3/8“ Thread Adapter, and a Storage Bag.
Includes a 15 ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8“ to 3/8“ Thread Adapter, and a Storage Bag.
Includes a Microphone Clip, 5/8“ to 3/8“ Thread Adapter, and a Storage Bag.
PG58
Includes a Tripod Boom Stand 15 ft (4.57m) XLR to 1/4“ Cable, Microphone Clip, 5/8“ to 3/8“ Thread Adapter, a
Storage Bag.
Specifications
Microphone Type
Polar Pattern
Dynamic (moving coil)
Cardioid (unidirectional)
Frequency Response
Polarity
60 to 15,000 Hz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
300 ohms
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Electromagnetic Hum Sensitivity
Switch
-53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL
26 dB equivalent SPL in a 1 millioersted field (60 Hz)
Built-in On/Off switch
Connector
Three-pin professional audio connector (male XLR type)
Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
Case
Environmental Conditions
This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit),
and at a relative humidity of 0 to 95%.
Weight
Net: 321 g (11.3 oz)
Packaged: 908 g (2 lb)
1000 Hz
Polar Pattern
Measured at 1000 Hz
Frequency Response
©2008 Shure Incorporated
|