Sonance Speaker System C2015Q User Manual

I N S T A L L A T I O N I N S T R U C T I O N S  
S
O
N
A
N
C
E
C
2
0
1
S
Q
I N - C E I L I N G  
S P E A K E R S  
DISTRIBUTED AUDIO PLACEMENT  
The Sonance C201SQ speaker posses extremely smooth and  
predictable off-axis frequency response. The chart below shows how  
far apart the speakers can be placed in a distributed audio system. The  
calculations are based on +/- 45 degrees of coverage from the  
speaker, and listener ear heights of 62" for standing and 40" for  
seated.  
INTRODUCTION  
Thank you for purchasing the Sonance C201SQ in-ceiling speaker.  
When properly installed, this product will provide you with years of  
entertainment pleasure.  
Speaker spacing in feet for a distributed audio system  
Standing Listener  
Seated Listener  
9.5'  
To obtain the full potential of your new speakers, please read all  
instructions before starting the installation. If you do not have the  
necessary skills to install the speakers yourself, contact your  
authorized Sonance dealer for installation options.  
8 foot ceiling  
10 foot ceiling  
12 foot ceiling  
14 foot ceiling  
5.7'  
9.7'  
13.5'  
13.7'  
17.7'  
17.5'  
21.5'  
PARTS LIST: C201SQ  
Each C201SQ speaker package includes the following items:  
(2) Sonance C201SQ speakers  
(2) Paintable grilles  
(2) Plastic paint plugs to protect speakers during painting  
(1) Mounting cutout template ( in packaging )  
Distributed Audio Placement  
2 - CHANNEL AUDIO PLACEMENT  
In a standard two channel audio system, the C201SQ speakers should  
be separated approximately 6 to 10 feet apart. If possible, the left and  
right speakers should be located the same distance from the listening  
position.  
OPTIONAL ACCESSORIES  
FlexBracket - part number 91942  
Plastic template to reserve hole in new construction.  
Designed to be used with the RotoLock® mounting system.  
HOME THEATER PLACEMENT  
Fire-Rated Back Can - part number 91933  
A metal can designed for the C201SQ speaker that meets  
the following fire testing criteria;  
When using the C201SQ speakers as a rear channel speaker, the  
speakers should be located from 2 to 6 feet behind the main listening  
position. The speakers should be separated approximately 6 to 10 feet  
apart.  
ASTM E119, CAN/ULC S101, NFPA 251, UBC 7-1, UL 263.  
TV  
1
 
INSTALLING THE SPEAKERS  
ADJUSTING YOUR SPEAKERS  
Pivoting tweeter  
The pivoting tweeter can direct sound toward or away from the  
listening area. To pivot the tweeter on the C201SQ, apply light  
pressure to the plastic ring around outside edge of the tweeter. If you  
have any questions about how the pivoting tweeter should be  
adjusted, consult your authorized Sonance dealer.  
Step 1  
Remove the paint plug from the  
speaker. Attach the wire from your  
amplifier to the terminals on the back of  
the speaker. Double check the polarity  
of the speaker wires, amplifier + to  
speaker + and amplifier - to speaker -.  
Note: Do not apply pressure to the tweeter dome.  
Here are some suggestions:  
Orient the pivoting tweeter toward the listening area if the speakers  
are widely separated and the music fails to blend into a central image  
when the system is operated in stereo.  
If you are using the speakers as rear channels in a home theater you  
can point the pivoting tweeter towards a wall or window to create a  
diffuse surround affect.  
Step 2  
Make sure the RotoLock® clamps are in  
the full clockwise position so that all the  
clamps are tucked within the cutout  
border. Insert the speaker into the hole  
in the ceiling.  
PAINTING THE SPEAKERS AND GRILLES  
Speakers and grilles can be painted before installation, which will  
eliminate the "paint scar" if the speaker needs to be removed for  
service. Speakers may also be painted after installation, but before the  
grilles are attached. All speakers come from the factory fitted with a  
plastic "paint plug." Use the paint plug to protect the drivers while the  
flange is being painted with the ceiling.  
Note: The maximum clamp thickness is  
1-1/4" (32mm)  
Sonance suggests always painting the grilles separate from the  
speaker. The grilles may be lightly sprayed with thin paint (5 parts  
thinning agent to 1 part paint), but be careful not to plug the holes.  
Too much paint will adversely affect the sound of the speaker.  
Step 3  
Tighten the four screws on the front of  
the baffle. The RotoLock clamps will  
rotate into position automatically and  
begin clamping. When you notice  
resistance on the four screws, the  
speaker has been clamped successfully.  
Once the grilles and flange are painted and dry, remove the paint plug  
from the flange and install the grilles.  
The flange is designed to flex and  
conform to any small imperfections in  
the wall surface. The screws should not  
be tightened so far that the flange bows  
out.  
Step 4  
After the speaker is installed, and all the  
adjustments shown to the right are  
completed, the grille can be installed.  
Insert about half of the grille into the  
groove at the edge of the speaker.  
Gently fit the remaining half of the grill  
into the speaker by working your hands  
around the speaker fitting the grille into  
the groove as you go along.  
Note: The torque applied to the  
mounting screws can be adjusted for  
proper grille fit.  
3
 
TECHNICAL ASSISTANCE AND SERVICE  
The Technical Assistance Department at Sonance is available at (800)  
582-0772 or (949) 492-7777 to answer any questions concerning the  
operation and installation of your speakers between the hours of 7:00  
AM and 5:00 PM Pacific time, Monday through Friday, except holidays.  
C201SQ  
Woofer  
6-1/2" (165mm) Black poly cone with a rubber surround  
3/4" (19mm) Cloth dome pivoting  
Tweeter  
In the event your unit should need repair or service, you may return  
the unit to your authorized dealer or use the following guidelines:  
Frequency Response 60Hz to 20kHz +/- 3dB  
Efficiency  
Power  
88dB 1w 1m  
1. Be prepared to state the model number and / or serial number,  
date of purchase and dealer's name and address when calling.  
5 watts minimum to 100 watts maximum  
8 ohms nominal 6 ohms minimum  
Aluminum  
Impedance  
Grille  
2. Contact Sonance directly at (800) 582-0772 or (949) 492-7777 or  
Speaker Dimensions 8-5/8" x 8 5/8 x 3-3/4" (219mm x 219mm x 95mm)  
3. If you are returning the product directly to Sonance, call us to  
obtain a return authorization number before shipping. YOU MUST  
HAVE PRIOR AUTHORIZATION TO RETURN YOUR UNIT.  
Cutout Dimensions  
Weight  
7-5/16" x 7-5/16" (185mm x 185mm )  
8.0 lbs per pair  
4. The original packaging must be used. If the original packaging is  
unavailable, replacements can be obtained from Sonance for a  
small fee.  
5. Ship the product via United Parcel Service, Federal Express, or  
RPS. Please do not use the U.S. Mail service.  
6. Write the return authorization number on the outside of the box.  
7. Ship to:  
Attn: Quality Assurance Department  
Sonance  
212 Avenida Fabricante  
San Clemente, CA 92672-7531  
8. FREIGHT COLLECT SHIPMENTS WILL BE REFUSED !  
WARRANTY COVERAGE ( U.S. ONLY )  
If, within five (5) years from the date shown on the bill of sale, the  
unit fails due to a defect in workmanship or material, Sonance will, at  
its option and at no charge, repair or replace the components of such  
unit which prove to be defective. For this warranty to be effective, the  
bill of sale must show that the unit was purchased from an "Authorized  
Sonance Dealer". This warranty shall apply exclusively to the original  
purchaser and shall not apply to units purchased for industrial or  
commercial use.  
Furthermore, this warranty shall not apply if:  
1. Damage to the unit was caused by accident, abuse or misuse;  
2. The unit was opened, modified, or repaired by unauthorized  
personnel.  
3. The unit was not used as outlined in the operating instructions.  
EXCLUSIONS AND LIMITATIONS  
The warranty set forth above is in lieu of all other warranties,  
expressed or implied, of merchantability, fitness for a particular  
purpose, or otherwise. The warranty is limited to Sonance products  
registered herein and specifically excludes any damage to  
loudspeakers and other allied or associated equipment which may  
result for any reason from use with this product. Sonance shall in no  
event be liable for incidental or consequential damages arising from  
any breach of this warranty or otherwise. This warranty gives you  
specific legal rights, and you may have rights which vary from state to  
state.  
Sonance 212 Avenida Fabricante San Clemente, CA 92672-7531, USA (800) 582-7777 or (949)492-7777 FAX: (949) 361-5151 Technical Support: (800) 582-0772  
©2006 Sonance. All rights reserved. Sonance , RotoLock, and Sonafill are registered trademarks of Dana Innovations.  
33-2724  
03/06  
 

Sony Car Stereo System PXA07 User Manual
Sony Computer Drive 2 586 675 11 1 User Manual
Sony Ericsson Cell Phone IS11S User Manual
Sony Video Game Console CECHL04 User Manual
Star Micronics Printer TSP552II User Manual
Sub Zero Refrigerator BI 42SD O User Manual
Summit Gas Grill 89208 User Manual
Sunbeam Bread Maker PN 109934 User Manual
Sunbeam Frozen Dessert Maker 4744 User Manual
Swann Home Security System SR244 BVD User Manual