Sony CD Player CDP C5CS User Manual

2-546-622-11(1)  
Compact Disc  
Player  
-System Integration CD Player  
GFBR  
FFRR  
ES  
Operating Instructions  
CDP-C5CS  
© 2004 Sony Corporation  
 
Table of Contents  
Front Panel .............................................................................................................................. 4  
Rear Panel................................................................................................................................ 5  
Remote Control ....................................................................................................................... 5  
Inserting Batteries Into the Remote Control............................................................................ 6  
Loading a CD .......................................................................................................................... 7  
Playing the CD –– Normal Play/Shuffle Play/Repeat Play ..................................................... 7  
Using the CD display .............................................................................................................. 9  
Replacing Discs While Playing a Disc .................................................................................. 10  
Programming the CD tracks .................................................................................................. 11  
Fading In or Out .................................................................................................................... 12  
FR  
Recording a CD by Specifying Tape Length (Time Edit)..................................................... 12  
Adjusting the Recording Level (Peak Search) ...................................................................... 13  
Precautions ............................................................................................................................ 14  
Notes on CDs......................................................................................................................... 14  
Troubleshooting..................................................................................................................... 15  
Specifications ........................................................................................................................ 15  
3US  
 
Parts Identification  
Front Panel  
The items are arranged in alphabetical order.  
Refer to the pages indicated in parentheses ( ) for details.  
CDP-C5CS  
CHECK w; (11, 12)  
CLEAR 9 (11, 12)  
BUTTON DESCRIPTIONS  
PHONES jack wa (8)  
PLAY MODE qa (8, 11, 13)  
POWER 1 (7)  
Remote sensor qh (6)  
REPEAT qf (8)  
TIME qg (9, 10)  
A OPEN/CLOSE ws (6, 7, 8, 9)  
H 4 (7, 8, 11, 13)  
X 5 (8, 13)  
x 6 (8, 13)  
lAMSL dial 0 (8, 9, 11,  
13)  
DISC 1–5 2 (7, 8, 11)  
Disc compartment qj (7)  
DISC SKIP 8 (7, 10, 12)  
Display 3 (9)  
EX-CHANGE 7 (10, 13)  
FADER qd (12)  
TIME EDIT ql (12)  
m/M qk (8, 9, 12)  
PEAK SEARCH qs (13)  
4US  
 
 
Rear Panel  
ANALOG OUT L/R jacks 2  
IR REMOTE 3 (6)  
DIGITAL OUT OPTICAL jack 1  
Mains lead 4  
Note  
You cannot use the following functions when making the digital connection:  
• Fading In or Out (see page 12)  
• Adjusting the output level using the ANALOG OUT LEVEL +/– buttons on the remote (see page  
9)  
Remote Control  
ANALOG OUT LEVEL +/– qk (8, 9)  
CHECK qs (11, 12)  
CLEAR qd (11, 12)  
CONTINUE 2 (7)  
DISC 1–5 7 (7, 8, 11)  
DISC SKIP qg (7, 10, 12)  
FADER qf (12)  
Number buttons 5 (8, 11)  
PROGRAM qa (7)  
REPEAT 3 (8)  
SHUFFLE 1 (7)  
TIME 4 (9, 10)  
BUTTON DESCRIPTIONS  
>10 6 (8)  
N qh (8, 11, 13)  
X 8 (8, 13)  
x qj (8, 13)  
. AMS > 9 (8, 9, 11, 13)  
m/M 0 (8, 9, 12)  
US  
5
 
Getting Started  
Notice for Custom Integration  
• When hooking a cable to an IR IN jack, the  
IR feature of the Main Unit does not  
function.  
• The disc compartment may close when the  
unit is being operated from other devices  
via the IR IN jack while the disc  
compartment is open.  
Inserting Batteries Into  
the Remote Control  
Notice for connecting an CAV-  
M1000ES  
• Hook up the Audio output jack of this  
player using the audio cable (supplied).  
Do not use the digital output (optical) jack.  
• Press CONTINUE for PLAY mode. If the  
Main Unit is set to other than CONTINUE  
mode, you cannot select a song from a CD  
or operate the DISC SKIP feature from  
another device.  
You can control the player using the supplied  
remote.  
Insert two R6 (size AA) batteries by matching  
the + and on the batteries to the diagram  
inside the battery compartment.  
Insert the negative () end first, then push in  
and down until the positive (+) end clicks into  
position.  
The function which does not use the player  
as a Custom Integration will be mentioned  
after the above explanation.  
When using the remote, point it at the remote  
sensor  
on the player.  
Tip  
When the remote no longer operates the system,  
replace both batteries with new ones.  
Transporting the player  
Before transporting the player, follow the  
procedure below to return the internal  
mechanisms back to their original position.  
Notes  
Do not leave the remote near an extremely hot or  
humid place.  
Do not drop any foreign object into the remote  
casing, particularly when replacing the batteries.  
Do not expose the remote sensor to direct sunlight  
or lighting apparatuses. Doing so may cause a  
malfunction.  
1 Remove all the discs from the disc tray.  
2 Press A OPEN/CLOSE to close the  
disc tray.  
no dISCappears in the display.  
If you dont use the remote for an extended period  
of time, remove the batteries to avoid possible  
damage from battery leakage and corrosion.  
3 Wait for 10 seconds, then press  
POWER to turn off the player.  
6US  
 
 
Playing CDs  
Loading a CD  
Playing the CD  
Normal Play/Shuffle Play/Repeat  
Play  
1 Turn on the amplifier and select the CD  
player position so that you can listen to  
the sound from this player.  
This unit lets you play the CD in different play  
modes.  
2 Press POWER to turn on the player.  
3 Press AOPEN/CLOSE.  
1 Press PLAY MODE repeatedly until the  
mode you want appears.  
The disc compartment slides out.  
4 Place a disc on the disc tray with the  
Select  
To play  
label side up.  
ALL DISCS  
(Continuous  
Play)  
All discs in the player  
consecutively in the order of disc  
number.  
1 DISC  
Only the disc youve selected.  
(Continuous  
Play)  
ALL DISCS  
SHUFFLE  
All tracks on all discs in random  
order.  
Disc number  
1 DISC  
SHUFFLE  
All tracks on the specific disc in  
random order.  
When you play a CD single,  
place it on the inner circle  
of the tray.  
PROGRAM  
The tracks on the CD in the  
order you want them to be  
played (see Programming the  
CD trackson page 11).  
5 To place other discs, press DISC SKIP  
and place the discs in the order you  
want to play.  
2 Press H.  
Tips  
Each time you press the button, the disc tray  
turns and you can place the discs in the  
empty disc compartments. The player plays  
the disc in front of you first.  
You can select the disc you want to start playing  
first by pressing one of the DISC 1 5 buttons.  
You can specify discs during ALL DISCS Shuffle  
Play mode, and the tracks on the specified discs are  
played in a random order.  
Press DISC 1 5 to specify the discs after Step 1.  
Semi-circles appear around the specified disc  
numbers in the display. To cancel the selected discs,  
press DISC 1 5 again. The semi-circles disappear.  
To return to ALL DISCS Shuffle Play, press PLAY  
MODE until ALL DISCS SHUFFLEappears in  
the display.  
6 Press AOPEN/CLOSE to close the disc  
compartment.  
You can select the playing mode by pressing  
CONTINUE, SHUFFLE, or PROGRAM on the  
remote.  
continued  
7US  
 
 
Repeat Play Operations  
Other Operations  
YoucanplaytheCDtracksrepeatedlyinany  
playmodes.  
Do this  
To  
Stop playback  
Pause  
Press x.  
ToactivatetheRepeatPlayfunction,press  
REPEATuntilREPEATappearsinthe  
display.  
Press X. Press X again or  
H to resume play.  
During play or pause, turn  
lAMSL clockwise  
(to go forward) or  
counterclockwise (to go  
backward)  
(or press >( to go  
forward) or . (to go  
backward) on the remote.  
Select a track  
To  
Press REPEAT  
Repeat only one track  
Until REPEAT 1appears  
while playing the track you  
want to repeat.  
Cancel Repeat Play  
Until REPEATor  
REPEAT 1disappears.  
Press the number button on  
the remote.*  
Select a track directly  
WhenyouareintheRepeatPlayfunction,the  
playerrepeatsthetracksasfollows:  
Press DISC SKIP.  
Go to the next disc  
Select a disc directly  
Find a point in a track  
Press DISC 1 5.  
When the disc is  
played in  
The player repeats  
Press and hold M or m  
during playback, and  
release at the desired point.  
Continuous Play  
(ALL DISCS)  
All the tracks on all discs  
Play tracks in random  
order  
Press PLAY MODE until  
SHUFFLEappears in the  
display.  
Continuous Play  
(1 DISC)  
All the tracks on the current  
disc  
Shuffle Play  
(ALL DISCS)  
All the tracks on all discs in  
random order  
Press AOPEN/CLOSE.  
Remove the CD  
Press ANALOG OUT  
LEVEL +/on the remote.  
Adjust the volume  
Shuffle Play  
(1 DISC)  
All the tracks on the current  
disc in random order  
Program Play  
(page 11)  
The same program  
* When you directly locate a track numbered over 10,  
press >10 first, then the corresponding number  
buttons. To enter 0,use button 10.  
Example: To play track number 30  
Press >10 first, then 3 and 10.  
Tips  
You can adjust the analog output level of the  
amplifier with the ANALOG OUT LEVEL +/on  
the remote (page 5).  
When you reduce the analog output level, FADE”  
appears in the display.  
When you turn off the player, the analog output  
level automatically returns to the maximum level.  
You can adjust the headphones volume on the  
remote. To adjust the volume, connect the  
headphones to the PHONES jack and adjust the  
volume with the ANALOG OUT LEVEL +/on  
the remote.  
If there is no CD in the player, no dISCappears  
in the display.  
8US  
 
Notes  
If “  
Using the CD display  
appears in the display, the disc has  
reached the end while you were pressing M. Press  
m or turn lAMSL counterclockwise to go  
back.  
If you press ANALOG OUT LEVEL +/on the  
remote while recording, the recording level will  
change even when it is preset on the tape deck, etc.  
Youcancheckinformationaboutthediscusing  
thedisplay.  
In the stop mode  
Press TIME.  
Current disc number  
Total playing time  
ALL DISCS  
1
6
2
7
3
8
4
9
5
1
2
3
4
5
10  
DISC  
TRACK  
MIN  
SEC  
1 10 4528  
Music calendar  
Total number of tracks  
Thedisplayshowsthecurrentdiscnumber,the  
totalnumberoftracks,totalplayingtimeand  
musiccalendar.  
Theinformationalsoappearswhenyoupress  
AOPEN/CLOSEtoclosethedisctray.  
Thetracksnumberedover20cannotbe  
displayedinthemusiccalendar.  
Notes on the disc number  
indications  
Theredcirclearoundadiscnumber  
indicatesthediscisreadytobeplayed.  
Whenallthetracksonadischavebeen  
played,thesemi-circlearoundthedisc  
numberdisappears.  
Whenadisccompartmentisrecognizedas  
empty,thesemi-circleddiscnumber  
disappears.  
During normal playback  
Whileplayingadisc,thedisplayshowsthe  
currentdiscnumber,tracknumber,playing  
timeofthetrackandthemusiccalendar.  
Thetracknumbersinthemusiccalendar  
disappearaftertheyareplayed.  
continued  
9US  
 
Using the CD display (continued)  
Replacing Discs While  
Playing a Disc  
To check the remaining time  
Press TIME during playback.  
Eachtimeyoupressthisbuttonwhileplayinga  
disc,thedisplaychangesasshowninthechart  
below.  
Youcanopenthedisctraywhileplayingadisc  
sothatyoucancheckwhatdiscsaretobe  
playednextandreplacediscswithout  
interruptingplaybackofthecurrentdisc.  
Playingtimeandnumberonthecurrenttrack  
1 Press EX-CHANGE.  
tRemainingtimeonthecurrenttrack  
t
Thedisctrayopensandtwodisc  
compartmentsappear.Eveniftheplayeris  
playingadisc,itdoesntstopplaying.  
Remainingtimeonthedisc  
Notes  
When the disc has more than 24 tracks, “– – . – –”  
appears instead of the remaining time.  
The remaining time on the disc appears only when  
the disc is played in Continuous Play.  
2 Replace discs in the compartments  
with new ones.  
Theplayerplaysthediscontheleftside  
compartmentafterthecurrentdisc,andthen  
theoneontherightsidecompartment.  
3 Press DISC SKIP.  
Thedisctrayturnsandothertwodisc  
compartmentsappear.  
4 Replace discs in the compartments  
with new ones.  
5 Press EX-CHANGE.  
Thedisctraycloses.  
While the disc tray is open by  
pressing the EX-CHANGE button  
Iftheplaybackofthecurrentdiscends,the  
playerstopsplaying.Ifthediscisplayedin  
1 DISCRepeatPlaymode(seepage8), the  
currentdiscstartsplayingagain.  
InALLDISCSShufflePlaymode(seepage  
8),tracksarereshuffledonthecurrentdisc.  
InProgramPlaymode(seepage11),only  
thetracksonthecurrentdiscareplayed.  
Do not push the disc tray to close it in  
Step 5, as you may damage the  
player.  
10US  
 
To cancel Program Play  
PressPLAYMODE.  
Programming the CD  
tracks  
Youcanarrangetheorderofthetracksonthe  
discsandcreateyourownprogram.The  
programcancontainupto32stepsone  
stepmaycontainatrackorawholedisc.  
Tips  
You can create your program while checking the  
disc labels.  
While the disc tray is open, follow Steps 1 to 4 with  
pressing the DISC SKIP button to check the disc  
labels. If you close the disc tray before Step 5, the  
total playing time appears in the display after a  
while.  
Note that, if the programmed track number isnt  
found on the disc, that step is automatically erased.  
The program remains even after the Program Play  
ends. When you press the H button, you can play  
the same program again.  
The program remains until you erase it or turn off  
the player. If you replace discs, the programmed  
disc and track numbers remain. So, the player plays  
only the existing disc and track numbers. However,  
the disc and track numbers that arent found in the  
player or on the disc are deleted from the program,  
and the rest of the program is played in the  
programmed order.  
1 Press PLAY MODE repeatedly until  
PROGRAMappears in the display  
before you start playing.  
Ifaprogramisalreadystored,thelaststep  
oftheprogramappearsinthedisplay.When  
youwanttoerasethewholeprogram,hold  
downCLEARuntilALLCLrappearsin  
the display (see page 12).  
2 Press DISC 1 5 to select the disc.  
ALinthedisplaystandsforalltracks.  
Whenyouwanttoprogramthewholedisc  
as one step, skip Step 3, and go to Step 4.  
For the recording to the A side or B side of the  
cassette tape, you can pause Program Play.  
3 Turn lAMSL until the track you  
want appears and push lAMSL to  
select the track.  
Note  
The total playing time doesnt appear when:  
You have programmed a track whose number  
exceeds 20.  
The total playing time of the program exceeds 200  
minutes.  
Thetracknumberthatyouprogrammed,the  
playingorder,andthetotalplayingtime  
appearinthedisplay.  
If youve made a mistake  
PressCLEAR,thenrepeatStep2.  
Checking the track order  
Youcancheckyourprogrambeforeorafter  
youstartplaying.  
Tip  
You can select the track using the number buttons  
on the remote. To select a track with a number  
over 10, use >10 (see page 8).  
Press CHECK.  
Eachtimeyoupressthisbutton,thedisplay  
showsthetrack(thediscandtracknumbers)or  
thedisc(thediscnumberandALindication)  
ofeachstepintheprogrammedorder.Afterthe  
laststepintheprogram,thedisplayshows  
Endandreturnstotheoriginaldisplay.Ifyou  
checktheorderafteryoustartplaying,the  
displayshowsonlytheremainingsteps.  
4 To program other discs or tracks, do  
the following:  
To program  
Repeat Step(s)  
Other discs  
2
3
Other tracks on the  
same disc  
Other tracks on  
other discs  
2 and 3  
5 Press H to start Program Play.  
continued  
11US  
 
Recording From CDs  
Programming the CD tracks  
(continued)  
Recording a CD by  
Specifying Tape Length  
(Time Edit)  
Changing the track order  
Youcanchangeyourprogrambeforeyoustart  
playing.  
You need to  
To  
Youcanhavetheplayercreateaprogramthat  
willfitthelengthofthetape.  
Press CHECK until the track you  
dont want appears in the display,  
then press CLEAR.  
Erase a track  
Theplayerautomaticallycreatesaprogram,  
keepingtheoriginalorderofthedisc.  
Press CLEAR. Each time you  
press the button, the last track will  
be cleared.  
Erase the last track  
in the program  
Theprogramcancontainupto32steps(a  
pauseinsertedbetweenstepsiscountedasone  
step).  
Follow Steps 2 through 4 of the  
programming procedure.  
Add tracks to the  
end of the  
program  
Notethattracksnumberedover20cannotbe  
programmedautomatically.  
Hold down CLEAR until ALL  
CLrappears in the display.  
Create a new program following  
the programming procedure.  
Change the whole  
program  
completely  
1 Press DISC SKIP to select the disc.  
2 Press TIME EDIT repeatedly before you  
start playing until EDITappears and  
A
Ain the  
indication flashes in the  
display.  
3 Press m or M to specify the tape  
Fading In or Out  
length.  
Eachtimeyoupressthesebuttons,the  
displaychangesasshownbelow,withthe  
tapelengthofonesidefollowingeach  
indication.  
Youcanmanuallyfadeinorouttoprevent  
tracksfromstartingorendingabruptly.  
Notethatyoucannotusethiseffectwhenyou  
usetheDIGITALOUT(OPTICAL)connector.  
C-46 23.00  
- -. - -  
C-54 27.00  
C-90 45.00  
C-60 30.00  
C-74 37.00  
Press FADER  
To  
During pause. FADEflashes.  
The play fades in.  
Start play fading in  
When you want to start fading  
out. FADEflashes. Then play  
fades out and the player pauses.  
End play fading out  
4 Press TIME EDIT to have the player  
create the program.  
Thedisplayshowsthetrackstoberecorded.  
A
B
Binthe  
display.  
indicationflashesinthe  
Fadingtimelastsfor5seconds.  
5 When you record on both sides of the  
tape, press TIME EDIT again.  
Theplayerinsertsapause,thencreatesthe  
programforsideB.Thedisplayshowsthe  
programmedtracks.  
Whenyourecordononesideofthetape,  
skipthisstep.  
12US  
 
 
6 Start recording on the deck and then  
Adjusting the Recording  
Level (Peak Search)  
press H on the player.  
7 Reverse the tape to side B and press  
H or X on the player to resume  
playing the remaining tracks.  
Theplayerlocatesthehighestlevelamongthe  
trackstoberecordedtoletyouadjustthe  
recordinglevelbeforeyoustartrecording.  
To cancel Time Edit  
1 Before you start playing, press PEAK  
PressPLAYMODE.  
SEARCH.  
Tips  
PEAKflashesinthedisplayandthe  
playerstartsscanningthediscsearchingfor  
thehighestpeaklevel.  
You can program the tracks you want in advance.  
Create a program selecting the desired tracks, then  
follow Steps 2 to 7. Be careful that the total playing  
time of the program does not exceed the tape length  
of one side.  
Afterscanningallthetracks,theplayer  
repeatstheportionwiththehighestpeak  
level.  
You can set the tape length freely using  
l AMS L.  
Example:When the tape length of one side is 30  
minutes and 15 seconds  
2 Adjust the recording level on the deck.  
3 Press x on the player to stop Peak  
1 To set the minutes, turn l AMS  
L until 30appears in the display,  
then push l AMS L.  
2 To set the seconds, turn l AMS  
L until 15appears in the display,  
then push l AMS L.  
Search.  
PEAKdisappearsfromthedisplay.  
Notes  
The portion with the highest level may differ every  
time you try the adjustment on the same disc. The  
difference is, however, so slight that you wont  
find any problem in adjusting the recording level  
precisely.  
To check and change your program, see pages 11  
and 12.  
Peak Search does not operate while you open the  
disc tray by pressing the EX-CHANGE button.  
13US  
 
Additional Information  
If you have any questions or problems  
concerning your player, please consult your  
nearest Sony dealer.  
Precautions  
On safety  
Notes on CDs  
Caution The use of optical instruments with this  
product will increase eye hazard.  
Should any solid object or liquid fall into the  
cabinet, unplug the player and have it checked by  
qualified personnel before operating it any further.  
Discs with non-standard shapes (e.g., heart, square,  
star) cannot be played on this unit. Attempting to do  
so may damage the unit. Do not use such discs.  
On handling CDs  
To keep the disc clean, handle the disc by its edge.  
Do not touch the surface.  
Do not stick paper or tape on the disc.  
On power sources  
Before operating the player, check that the  
operating voltage of the player is identical with  
your local power supply. The operating voltage is  
indicated on the nameplate at the rear of the player.  
The player is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the player itself has been turned off.  
If you are not going to use the player for a long  
time, be sure to disconnect the player from the wall  
outlet. To disconnect the AC power cord (mains  
lead), grasp the plug itself; never pull the cord.  
AC power cord must be changed only at the  
qualified service shop.  
Do not expose the disc to direct sunlight or heat  
sources such as hot air ducts, nor leave it in a car  
parked in direct sunlight as there can be  
considerable rise in temperature inside the car.  
Do not use any commercially available stabilizer. If  
you do, the disc and the player may be damaged.  
After playing, store the disc in its case.  
On cleaning  
Before playing, clean the disc with a cleaning cloth.  
Wipe the disc from the centre out.  
On placement  
Place the player in a location with adequate  
ventilation to prevent heat build-up in the player.  
Do not place the player on a soft surface such as a  
rug that might block the ventilation holes on the  
bottom.  
Do not place the player in a location near heat  
sources, or in a place subject to direct sunlight,  
excessive dust or mechanical shock.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners or anti-static spray  
intended for vinyl LPs.  
On operation  
If the player is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lenses inside the  
player. Should this occur, the player may not  
operate properly. In this case, remove the disc and  
leave the player turned on for about an hour until  
the moisture evaporates.  
Note on CD-R/CD-RW playback  
Discs recorded on CD-R/CD-RW drives may not be  
played back because of scratches, dirt, recording  
condition, or the drives characteristics. Besides, the  
discs, which are not yet finalized at the end of  
recording, cannot be played back.  
On adjusting volume  
Do not turn up the volume while listening to a  
portion with very low level inputs or no audio  
signals. If you do, the speakers may be damaged  
when a peak level portion is played.  
On cleaning  
Clean the cabinet, panel and controls with a soft  
cloth slightly moistened with a mild detergent  
solution. Do not use any type of abrasive pad,  
scouring powder, or solvent such as alcohol or  
benzine.  
14US  
 
 
Troubleshooting  
Specifications  
If you experience any of the following  
difficulties while using the player, use this  
troubleshooting guide to help you remedy the  
problem. Should any problem persist, consult  
your nearest Sony dealer.  
Compact disc player  
Laser  
Semiconductor laser (λ =  
780 nm)  
Emission duration:  
continuous  
2 Hz to 20 kHz 0.5 dB  
More than 93 dB  
Less than 0.0045%  
Theres no sound.  
Frequency response  
Dynamic range  
Harmonic distortion  
Check that the player is connected securely.  
Make sure you operate the amplifier correctly.  
Adjust the analog output level with ANALOG  
OUT LEVEL +/on the remote.  
Outputs  
Jack  
type  
Maximum  
Load  
The CD does not play.  
output level impedance  
Theres no CD inside the player. no dISC”  
appears. Insert a CD.  
ANALOG  
OUT  
Phono  
jacks  
Over 10  
kilohms  
2 V  
(at 50 kilohms)  
Place the CD with the label side up on the disc  
tray correctly.  
DIGITAL  
OUT  
Optical  
output  
(OPTICAL) connector  
18 dBm  
Wave  
length:  
660 nm  
Clean the CD (see page 14).  
Moisture has condensed inside the player.  
Remove the disc and leave the player turned on  
for about an hour.  
PHONES  
Stereo  
phone  
jack  
10 mW  
32 ohms  
Place the CD in the correct position on the disc  
tray.  
The recording level has changed.  
General  
The recording level changes if you adjust the  
analog output level with ANALOG OUT  
LEVEL +/on the remote during recording.  
Power requirements  
Power consumption  
Dimensions (approx.)  
(w/h/d)  
120 V AC, 60 Hz  
11 W  
430 x 110 x 400 mm  
(17 x 4 3/8 x 15 3/4 in.)  
incl. projecting parts  
5 kg (11 lbs 1 oz)  
The remote does not function.  
When hooking the connecting cable to an IR IN  
jack, this will be operated via the other devices.  
The IR feature of the Main Unit will not  
function.  
Mass (approx.)  
Supplied accessories  
Audio cord (2 phono plugs 2 phono plugs) (1)  
Remote commander (remote) (1)  
R6 (size AA) batteries (2)  
Remove the obstacles in the path of the remote  
and the player.  
Point the remote at the remote sensor  
player.  
on the  
Design and specifications are subject to change  
without notice.  
Replace all the batteries in the remote with new  
ones if they are weak.  
The player functions incorrectly.  
The microcomputer chips may be operating  
incorrectly. Turn the power off, then turn it back  
on to reset the player.  
15US  
 
Sony Corporation  
Printed in Malaysia  
 

Sennheiser TV Mount LAH 500 User Manual
Shark Carpet Cleaner S3250 11 User Manual
Sharp Car Video System PN E421 User Manual
SIIG Printer 101828 User Manual
Silvercrest Coffeemaker SKAT1000A1 User Manual
Sony Carrying Case LCM FD71 User Manual
Sony Speaker System SS RX900D User Manual
SUPER MICRO Computer Computer Hardware LSI 2108 2208 User Manual
SVA Flat Panel Television VR3708W User Manual
Sylvania Stereo System SRCD846 User Manual