IMPORTANT! PROBLEMS?
Before taking Crash Force™ Regenerator™ RC
back to the retailer, call our friendly
RC technicians at: 1-800-622-8339
STORAGE: The Crash Force™ Regenerator™
RC should be stored indoors in the box and
foam tray after each use.
After
Impact!
CRASH FORCE™
REGENERATOR SUV™
BATTERY INSTALLATION
Crash Force™ Regenerator™ is designed to work with standard RC 6-Volt NiCad batteries and charger,
sold separately. If you do not have a 6-Volt battery and charger, Crash Force™ Regenerator™ can operate with
Five-AA batteries. • Controller is designed to work with a 9-Volt battery, sold separately.
INSTALLING BATTERIES IN THE REGENERATOR™
compartment, making
sure to follow the
6 VOLT
Battery
1 - To install the
6-Volt battery, rotate
the door locks to the
sides of the battery
compartment door
as shown.
correct + and –
Turn
Vehicle
Over
Compartment
Door
2
polarity markings.
Then fold the internal
battery adjuster out,
to hold the 6-Volt
battery in tight.
6-V
Battery
1
3
Lock
Battery
Compartment
2 - Remove the battery 4 - Replace the battery
Battery
Compartment
Door
compartment door.
3 - Place the battery
in the battery
compartment door and
rotate the door locks
to their “Lock” positions.
Lock
3 - Place the batteries
in the battery tray
AA BATTERIES
1 - To install the AA
according to the + and
– polarity markings.
2
Turn
Vehicle
Over
batteries, rotate the
Battery
Compartment
Door
door locks to the sides 4 - Place the battery
of the door as shown.
2 - Remove the battery
compartment door
and make sure the
internal battery
tray into the battery
compartment.
5 - Replace the battery
compartment door and
rotate the door locks
to their “Lock” positions.
1
Lock
Five-AA
Battery
Compartment
Door
Batteries
Lock
adjuster is folded in,
out of the way.
3
Battery
Tray
Phillips Screw
Battery
INSTALLING CONTROLLER
1
9 VOLT BATTERY
4
Compartment
Door
1 - Using a Phillips screwdriver, undo the
hold down screw and remove the battery
compartment door.
9-V
Battery
2
2 - Place the 9-Volt battery in the battery
compartment, making sure to follow the
correct + and – polarity markings.
3 - Replace the battery compartment door
and refasten the hold down screw.
3
Battery
Compartment
Battery
Compartment
|
SIIG Computer Drive 04 0322C User Manual
Sony Computer Monitor SSM 121 User Manual
Sony Printer DPP EX50 User Manual
Sony Projector VPL PX32 User Manual
Sony Stereo System STR SL40 User Manual
Splendide Washer Dryer WDC1025MCEE User Manual
StarTechcom Laptop Docking Station USB3SMDOCKHV User Manual
Sunbeam Fan HAOF1265 User Manual
Sunbeam Wok WW7500D User Manual
Sungale Digital Photo Frame PF801 User Manual