Canon Calculator F 718G User Manual

Deleting and Correcting an Expression  
In insert mode: Move the cursor to the right of the character  
To select the statistical display format [3] STAT  
([1] ON or [2] OFF)  
[1] ON: Show FREQ (Frequency) Column in Statistical  
Data Input Screen  
[2] OFF: Hide FREQ (Frequency) Column in Statistical  
Data Input Screen  
To select the angle unit [3] Deg, [4] Rad or [5] Gra  
[3] Deg: Angle unit in Degree  
[4] Rad: Angle unit in Radian  
Omit the multiplication sign and final close parenthesis.  
How to use the Slide Cover  
Open or close the cover by sliding as shown in the figure.  
LCD  
Operation  
Mode  
CONTENTS  
GETTING STARTED  
Power ON, OFF  
INPUTTING EXPRESSIONS AND VALUES  
Input Capacity  
ENGLISH  
Indicator  
Example: 2 x log 100 x (1+3) = 16  
or function that needs to be deleted, then press  
.
DISPLAY (4-line Dot Matrix DISPLAY)........................................P. 3  
GETTING STARTED......................................................................P. 4  
Power ON, OFF ........................................................................P. 4  
Display Contrast Adjustment.....................................................P. 4  
Mode Selection .........................................................................P. 4  
Calculator Set-up Menu ............................................................P. 5  
Before Using the Calculator......................................................P. 7  
INPUTTING EXPRESSIONS AND VALUES.................................P. 8  
Input Capacity...........................................................................P. 8  
Input Editing..............................................................................P. 8  
Inputting and Display result in Maths Mode............................P. 11  
INPUT RANGE AND ERROR MESSAGE...................................P. 11  
Calculation Precision, Input Range.........................................P. 11  
Order of Operations ................................................................P. 14  
Calculation Stacks ..................................................................P. 16  
Error Message and Error Locator ...........................................P. 16  
BASIC CALCULATIONS.............................................................P. 17  
Arithmetic Calculations ...........................................................P. 17  
Memory Calculations ..............................................................P. 17  
Fraction Calculations ..............................................................P. 19  
Percentage Calculations.........................................................P. 20  
Degree-Minutes-Seconds Calculations...................................P. 20  
Reply & Multi-statements........................................................P. 21  
FUNCTIONAL SCIENTIFIC CALCULATIONS............................P. 22  
Square, Root, Cube, Cube Root, Power Root,  
COMP Normal calculation  
[5] Gra: Angle unit in Gradient  
Operation 1:  
Display 1  
First time operation:  
1. Pull out the battery insulation sheet, then the battery will  
be loaded.  
F-718S allows you to input a single calculation up to 99  
bytes. Normally, one byte is used as each time you press  
one of the numeric keys, arithmetic keys, scientific function  
STAT  
Statistical calculation  
STAT  
In overwrite mode: Move the cursor under the character or  
function being deleted, then press  
Including  
*2,  
*1,  
*3  
2xlog(100) x (1+3)  
.
90º = radians = 100grads  
TABLE Function Table calculation  
*2  
*1  
2. Press  
to reset the calculator.  
keys or  
,
. Some functions require 4 – 13bytes.  
, and the direction keys will not use up any bytes.  
Example: 1234567 + 889900  
To select the decimal point display format [4] Disp  
([1] Dot or [2] Comma)  
[1] Dot: specify dot format for Decimal point result display  
[2] Comma: specify comma format for Decimal point  
result display  
To select display digit or notation [6] Fix, [7] Sci or  
[8] Norm  
[6] Fix: Fixed Decimal, [Fix 0~9?] appears, specify the  
number of decimal places by pressing [0] – [9].  
Example: 220 ÷ 7 = 31.4286 (FIX 4)  
= 31.43 (FIX 2)  
Initial mode is COMP mode.  
16  
*3  
Power ON: When  
Power OFF:  
is pressed.  
When input capacity is less than 10bytes, the input cursor  
will change from “ ” to “ ” that notifying the memory is  
running now.  
(1) Replace an entry (1234567 1234560)  
OPEN  
CLOSE  
Operation 2:  
Display 2  
Calculator Set-up Menu  
2log(100)(1+3  
Omitting  
Omitting  
*1,  
*3  
are pressed.  
F-718S/F-718SGA/  
F-718SG/F-718SA  
DISPLAY (4-line Dot Matrix DISPLAY)  
Press  
press  
to enter the Calculator Set-up Menu;  
for next / previous page.  
/
Auto Power off Function:  
When the calculator is not used for about 7 minutes, it  
will automatically power off.  
16  
To Adjust Display contrast [5]  
See “Display Contrast Adjustment” section.  
CONT  
Input Editing  
[7] Sci: Scientific Notation, [Sci 0~9?] appears, specify  
the number of significant digits by pressing [0] – [9].  
Example: 220 ÷ 7 = 3.1429 x 101 (SCI 5)  
= 3.143 x 101 (SCI 4)  
New Input begins on the left of display. If input data are  
more than 15 characters, the line will scroll to the right  
consecutively. You can scroll back to the left by using  
*1. Omit multiplication sign (x)  
- Input before an open parentheses  
: 1 x (2+3)  
Before Using the Calculator  
Press  
or  
Display Contrast Adjustment  
key  
- Input before scientific functions that includes  
parenthesis: 2 x cos(30)  
- Input before Random number function  
Check the current Calculation Mode  
Press  
Display Contrast Adjustment screen.  
(5:  
CONT  
), enter the  
and  
to review the input  
Be sure to check the status indicators that indicate the  
current calculation mode (COMP, STAT, TABLE), display  
formats setting and angle unit setting (Deg, Rad, Gra)  
[8] Norm: Exponential Notation, [Norm 1~2?] appears,  
specify the exponential notation format by pressing [1] or  
[2].  
To select the calculator input & output format [1]  
Maths or [2] Line  
[1] Maths – (Maths mode): The majority of calculation  
input and output (e.g. Fraction, pi, square root  
number) are shown in Mathematics textbook format.  
In Line mode, press to let the cursor jump to the  
beginning of inputting, while will jump to the end.  
- Input before Variable (A, B, C, D, X, Y, M), π, е  
*2. Scientific functions come with the open parenthesis.  
Example: sin(, cos(, Pol(, LCM(…. You need to input the  
<Status Indicators>  
S
: Shift key  
Return to initial setup  
Reciprocal and pi ....................................................................P. 22  
Logarithm, Natural Logarithm, Antilogarithm and logab..........P. 22  
Angle Unit Conversion ............................................................P. 22  
Trigonometry Calculations ......................................................P. 23  
Permutation, Combination, Factorials and Random  
A
: Alpha key  
In Maths mode, press  
beginning of inputting while it is at the end of the input  
calculation. Or press to let the cursor jump to the end  
to let the cursor jump to the  
argument and the close parenthesis  
.
*3. Omit the last close parenthesis before the  
Norm 1: Exponential notation is automatically used for  
integer values with more than 10 digits and decimal  
values with more than TWO decimal points.  
Pressing  
(YES)  
: COMP  
: Maths  
: Deg  
to return the  
,
,
M
: Independent memory  
: Store memory  
: Recall memory  
: Statistics mode  
: Degree Mode  
initial calculator setup  
Calculation mode  
Input/Output Format  
Angle unit  
(2) Deletion (1234567 134567)  
Press  
Press  
Press  
to make the display contrast darken.  
to make the display contrast lighten.  
or to confirm and clear the screen.  
,
.
STO  
RCL  
STAT  
D
[2] Line – (Line mode): The majority  
of calculation input and output are  
shown in the lines format. And  
“LINE” icon will be shown.  
Maths mode  
of inputting while it is at the beginning of the input  
calculation.  
Number Generation ................................................................P. 24  
Least Common Multiple and Greatest Common Divisor.........P. 25  
Quotient and Remainder Calculations ....................................P. 26  
Coordinate Conversion ...........................................................P. 26  
Absolute Value Calculations ...................................................P. 27  
Engineering Notation ..............................................................P. 27  
Display Values Exchange .......................................................P. 28  
STATISTICAL CALCULATIONS.................................................P. 29  
Statistical Type Setection........................................................P. 29  
Statistical Data Input...............................................................P. 29  
Editing Statistical Sample Data...............................................P. 30  
Statistical Calculation Screen .................................................P. 31  
Statistical Menu.......................................................................P. 31  
Statistical Calculation Example...............................................P. 33  
FUNCTION (x, y) TABLE CALCULATION..................................P. 34  
BATTERY REPLACEMENT ........................................................P. 36  
ADVICE AND PRECAUTIONS....................................................P. 37  
SPECIFICATIONS .......................................................................P. 38  
Method 1: Line/Maths  
mode - Insert mode  
Method 2: Line mode -  
Overwrite mode  
12times  
12|34567+889900  
134567+889900  
1234567+889900_  
1234567+889900  
134567+889900  
Insert and overwrite Input mode  
In Line mode, you can use INSERT  
for inputting.  
Norm 2: Exponential notation is automatically used for  
integer values with more than 10 digits and decimal  
values with more than NINE decimal places.  
or overwrite mode  
Display Digits  
: Norm 1  
: d/c  
: OFF  
: Dot  
To initialize the LCD contrast, press  
outside the Display Contrast Adjustment screen.  
Fraction Display Format  
Statistical Data Input  
Decimal Point format  
- In Insert mode (Default input mode), the cursor is a  
vertical flashing line “ | ” for inserting a new character.  
R
: Radian Mode  
Line mode  
For the STAT mode, the Input &  
Display format will switch to Line  
mode automatically.  
NOTES  
13times  
Example: 1 ÷ 1000 = 1 x 10-3 (Norm 1)  
= 0.001 (Norm 2)  
LINE  
G
: Gradient Mode  
: Fixed-decimal setting.  
: Scientific Notation  
: Line Display mode  
: Up Arrow  
F-718SGA and F-718SG the top case, bottom case,  
battery cover and hard case in this product are made  
from recycled Canon copier plastic.  
Mode Selection  
- In overwrite mode, press  
key to switch the  
This action will not clear the variable memories.  
FIX  
SCI  
LINE  
cursor to a flashing horizontal ( _ ) and replace the  
character at the current cursor position.  
Press  
screen.  
Press  
to enter the Calculation Mode Selection  
To select the fraction format [1] a b/c or [2] d/c  
[1] a b/c: specify Mixed fraction display  
[2] d/c: specify Improper fraction display  
Initialize the calculator  
(3) Insertion (889900 2889900)  
,
,
to select the calculation mode.  
When you are not sure of the current calculator setting, you  
are recommended to initialize the calculator (calculation  
mode “COMP”, angle unit “Degree”, and clear reply and  
variable memories), and LCD contrast by pressing  
In Maths mode, you can only use the insert mode.  
Line/Maths mode -  
Insert mode  
6times  
1234567+|889900  
1234567+2|889900  
: Down Arrow  
Whenever the display format changes from Line mode to  
Maths mode, it will automatically switch to the insert mode.  
Disp  
: Multi-statements Display  
(All)  
(YES)  
.
E-IE-410  
PRINTED IN CHINA  
2
3
4
5
6
7
8
9
10  
Function Calculation Input Ranges  
Fraction Calculations  
Percentage Calculations  
Example in  
Inputting and Display result in Maths Mode  
5th  
Fractions: a b/c, d/c  
Calculation Stacks  
Functions  
Input Range  
|x|,|y| 9.999 999 999x1099  
x2+y2 9.999 999 999x1099  
Functions  
Abs  
Input Range  
BASIC CALCULATIONS  
Functions  
Input Range  
|x| <9×109  
|x|<1x10100  
|x|<1x10100  
6th  
7th  
8th  
Prefix symbol: (–) (negative sign)  
The calculator supports Fraction calculation and the  
conversions between Fraction, Decimal point, Mixed fraction  
and Improper fraction.  
Example in  
In Maths Mode, the Input and display result of fraction or  
, x-1, 10 , e ,  
This calculator uses memory areas, called “stacks”, to  
temporarily store numeric value (numbers) and commands  
(+, –, x…) according to their precedence during calculations.  
The numeric stack has 10 levels and command stack has  
128 levels. A stack error [Stack ERROR] occurs whenever  
you try to perform a calculation that exceeds the capacity of  
stacks.  
Calculations are performed in sequence according to “Order  
of Operations”. After the calculation is performed, the stored  
stack values will be released.  
Key in operation  
Display  
Press  
to enter COMP mode.  
Pol(x,y)  
3
certain functions (log, x2, x3, x ,  
Abs) is shown in Handwriting/Mathematics format.  
,
,
One-variable  
Statistical  
calculation  
Maths mode  
Statistical estimated value calculation: x, y, x1, x2  
DEG  
RAD  
GRA  
DEG  
RAD  
GRA  
DEG  
RAD  
GRA  
0
0
0
0
0
0
ˆ ˆ ˆ  
ˆ
During the busy calculation, the calculator shows only  
the indicators (without any calculation result). You can  
23 + 7  
A
23+7  
A
sinx  
|x| <157 079 632.7  
|x| <1x1010  
0
r
9.999 999 999x1099  
: Same as sinx  
|a|,b,c <1x10100  
b,c  
|FREQ|<1x10100  
|x|<1x10100  
Multiplication where sign is omitted: Multiplication sign  
omitted immediately before , e, variables (2 , 5A, A,  
etc.), functions with parentheses (2 (3), Asin(30), etc.)  
Permutations, combinations: nPr, nCr  
Key in operation  
Display  
Specify the fraction calculation result display format by either  
mixed fraction (a b/c) or improper fraction (d/c) in set-up  
menu.  
Maths mode  
To calculate 25% of  
820 (Maths mode)  
Rec(r, )  
30  
1
Two-variable  
Statistical  
press  
key to interrupt the calculating operation.  
820x25%  
2 x sin A = 1  
2sin(A  
|x| <9×109  
|y|<1x10100  
205  
At the default setting, fractions are displayed as improper  
fractions (d/c).  
Mixed Fraction display result only available after set the (a  
b/c) in the setup menu.  
100  
|FREQ|  
Example in  
Arithmetic Calculations  
9th  
calculation  
cosx  
tanx  
|x| <157 079 632.7  
|x| <1x1010  
0
<1x10  
Key in operation  
Display  
The percentage of  
750 against 1250  
(Maths mode)  
750÷1250%  
Maths mode  
Clear memory  
0
A
°′ ″  
10th  
11th  
12th  
Multiplication and division: ×, ÷  
To calculate with negative values (exclude the negative  
exponent) enclose then with parentheses.  
This calculator supports 99 levels of parenthetical  
expression.  
The display seconds value is subject to an error of  
+/-1 at the second decimal place  
|x|<1x10100  
Errors are cumulative in the case of consecutive  
calculations, this is also true as internal consecutive  
calculation are performed in the case of ^(xy), x√y, 3√, x!,  
nPr, nCr , etc. And may become large.  
0
Addition and subtraction: +, –  
Same as sinx, except when |x| =(2n-1)×90  
Same as sinx, except when |x| =(2n-1)× /2  
Same as sinx, except when |x| =(2n-1)×100  
60  
Improper Fraction  
(d/c)  
11  
Mixed Fraction  
(a b/c)  
Calculation ending instruction: =, M+,M- STO(store  
memory),FMLA  
Independent Memory  
Independent memory  
as variable M. It is convenient for calculating cumulative  
total by just pressing  
(subtract from memory)  
Memory contents are retained even when the calculator  
is powered off.  
Clear independent memory (M) by pressing  
Error Messages and Error locator  
Deciaml  
Sexagesimal Conversions  
uses the same memory area  
2
Maths Mode  
3
The calculator is locked up while an error message is shown on  
the display to indicate the cause of the error.  
° ″  
sin-1x  
cos-1x  
tan-1x  
sinhx  
coshx  
sinh-1x  
cosh-1x  
tanhx  
tanh-1x  
logx/lnx  
10x  
0°00|x| 9999999°5959″  
x>0: -1x10100 < ylog x < 100  
Display of results using  
Calculation results may be displayed using  
the following cases:-  
1. When intermediate and final calculation results are  
displayed in the following form:  
3
3
Remark  
In the same precedence level, calculations are  
performed from left to right.  
Operation enclosed within parentheses is performed  
first. When a calculation contains an argument that is a  
negative number, the negative number must be enclosed  
within parentheses.  
0
0
0
|x|  
1
Degree-Minutes-Seconds Calculations  
(add to memory) or  
when all of  
(1) Some input expressions cause the height of a  
calculation expression to be greater than one display  
screen. Maximum input capacity: 2 display screen  
(31 dots x 2).  
(2) Calculator memory limits how many functions or  
perentheses can be input in any single expression. In  
this case divide the expression into multiple parts and  
calculate separately.  
Example in  
Press  
initial display of latest mode.  
Press or to display input expression with the cursor  
positioned next to the error.  
to clear the error message, then return to the  
Key in operation  
Display  
11_|3  
3_|2_|3  
Line Mode  
Press  
Maths mode  
Use degrees (hours), minutes and seconds key to perform a  
sexagesimal (base-60 notational system) calculation or convert  
the sexagesimal value into decimal value.  
|x| 9.999 999 999x1099  
x=0: y>0  
^(xy)  
(-2.5)2  
(-2.5)2  
to switch a calculation result between fraction and  
25  
4
x<0: y=n,m/(2n+1) (m,n are integers)  
However: -1x10100<ylog|x|<100  
y>0: x 0, –1x10100<1/x logy<100  
y=0:x>0  
|x| 230 258 509 2  
decimal format.  
Press  
improper fraction and mixed fraction format.  
Press  
to clear the error message, clear the replay  
to switch a calculation result between  
|x| 4.999 999 999x1099  
memory history and return to the initial display of the latest  
mode.  
(4 x 1075)(-2 x  
4E75x-2E-79  
Degree-Minutes-seconds  
Decimal points  
0
1
0
0
Clear all memory values by pressing  
2(MCL)  
10-79  
)
Result will be displayed in decimal format automatically  
whenever the total digit of a fractional value (integer +  
numerator + denominator + separator marks) exceeds 10.  
As a fraction calculation is mixed with decimal value, the  
result will be displayed by decimal format.  
x
4.999 999 999x1099  
x
Example:  
1
√y  
|x| 9.999 999 999x1099  
|x| 9.999 999 999x10-1  
y<0:x=2n+1,(2n+1)/m (m≠0;m,n are integers)  
However: -1x10100<(1/x)log|y|<100  
Total of integer, numerator, and denominator must be  
10 digits or less (including division marks).  
Error Message  
Math ERROR  
Cause  
Action  
–22 = –4  
(–2)2 = 4  
1250  
Example in  
2. When the number of terms in the intermediate and final  
calculation result is one or two.  
(3) If part of the expression you input is cut off after  
calculation and in the result display screen you can  
Key in operation  
Display  
• The intermediate or final  
result is outside the  
allowable calculation  
range.  
Check the input values  
and make sure they are  
all within the allowable  
ranges, Pay special  
Answer Memory  
The input values or the most recent calculation result will  
be automatically stored into Answer memory whenever  
you press  
memory can hold up to 18 digits.  
Recall and use the latest stored Answer memory by  
pressing  
Answer memory is not updated as an error operation  
had been performed.  
Answer memory contents can be maintained even if  
Maths mode  
86º37’34.2” ÷ 0.7 =  
0< x 9.999 999 999x1099  
86º37 º 34.2 º ÷ 0.7  
press  
or  
to view the full expression.  
a b/c  
Memory Calculations  
Memory Variables  
There are 17 memory variables (0 – 9, A – D, M, X and  
Y), which store data, results, or dedicated values.  
Store values into memory by pressing  
variable.  
Recall memory values by pressing  
variable.  
Memory content can be cleared by pressing  
123º45’6” (Maths mode)  
-9.999 999 999 x1099  
-9.999 999 999 x1099  
x
x
99.999 999 99  
230.258 509 2  
Fraction  
Decimal point conversion  
Key in operation  
Order of Operations  
When same priority commands are mixed into one  
calculation.  
• An attempt to perform a  
attention to values in any  
,
,
,
,
. Answer  
ex  
0
a<1x1010, 0 b<1x1010 (a,b should be positive  
calculation using a value using memory areas  
that exceeds the  
allowable input range.  
• An attempt to perform an  
illogical operation  
(division by zero, etc.)  
This calculator will automatically determine the operation  
priority of each individual command as follows:-  
123º45’6”  
i~Rand(a,b)  
Rand  
x <1x10100  
integers or 0)  
√x  
0
INPUT RANGE AND ERROR MESSAGE  
123º45’6” 123.7516667  
86º37 º 34.2 º ÷ 0.7  
123.7516667  
Example in  
Maths mode  
.
Example 1:  
x2  
|x|<1x1050  
Result generates a 3 digits pseudo random  
Display  
+ Memory  
(Maths mode)  
1st Priority Recall memory (A, B, C, D, 0-9), Rand  
1 ÷ 2 = 0.1591549431  
x3  
|x| 2.154 434 69x1033  
number(0.000~0.999)  
Calculation Precision, Input Range  
1
2
5
6
7
3
1
1
5
6
2.3456 2º20’44.16”  
2.3456  
1
+
=
+
2nd  
3rd  
Calculation within parentheses ( ).  
x-1  
|x|<1x100100,x  
|x|<1x10100  
0
0<x, y, z 9.999 999 999x1012 (positive integers)  
Default result when x, y, z=0  
2
Stack ERROR • The capacity of the  
numeric stack or  
operator stack is  
• Simplify the calculation.  
• Divide the calculation  
into two or more  
+ Memory  
(Maths mode)  
2º20’44.16”  
Example 2:  
LCM(x,y,z)  
GCD(x,y,z)  
Function with parenthesis that request the input  
argument to the right Pol(, Rec( , sin(, cos(, tan(,  
sin–1(, cos–1(, tan–1(, sinh(, cosh(, tanh(, sinh–1(,  
cosh–1(, tanh–1(, log(, ln(, e^(, 10^(, (, 3 (, Abs(,  
ROUND(, LCM(, GCD(, Q…r(, i~Rand(,  
7
3
Number of Digits for  
Internal Calculation  
Up to 18 digits  
3√x  
pressing  
off the calculator.  
, changing the calculation mode, or turning  
in Maths mode  
2
A
1
4
exceeded.  
separate parts.  
x!  
0
0
1
0
1
x
69 (x is an integer)  
0<x, y, z 9.999 999 999x1012 (positive integers)  
1
1
5
6
7
Precision*  
±1 at the 10th digit for a single calculation.  
±1 at the least significant for exponential  
display  
+ Memory variable.  
1 ÷ 2A =  
2.333333333  
+
+
Syntax ERROR An attempt to perform an  
illegal mathematical  
operation.  
Press  
or  
to display  
Example in  
n < 1x1010, 0  
r
n (n,r are integers)  
Default result when x, y, z=0  
2
Key in operation  
Display  
3
(Fraction  
the cursor at the location  
of the error, make  
appropriate corrections  
Maths mode  
nPr  
nCr  
{n!/((n-r)!) < 1x10100  
n < 1x1010, 0  
n (n,r are integers)  
0<x,y 9.999 999 999x1012 (positive integers)  
Decimal)  
2.333333333  
Example: 23 + 7 A (30 store into A), calculate 2 sinA  
and clear memory A.  
123 + 456  
M+,  
Ans2  
Calculation Range  
±1 × 10–99 to ±9.999999999 × 1099 or 0  
1
3
1
2
5
6
r
0
Q
999 999 9999, 0  
r
999 999 9999 (Q,r are  
2.333333333  
2
Ans2 = 335,241  
335241  
1
4th  
Functions that come after the input value preceded by  
values, powers, power roots:  
Q…r(x,y)  
Insufficient  
MEM  
The calculation result of  
Function Table mode  
parameters caused more  
than 30 x-values to be  
generated for a table  
Narrow the table  
calculation range by  
changing the start, end,  
and step values, and try  
again.  
n!/r! < 1x10100 or 1 n!/(n-r)! < 1x10100  
integers)  
(Decimal  
Fraction)  
Mixed  
1
3
2
789900 – Ans =  
454,659  
789900-Ans  
454659  
Default result when x=0  
x2, x3, x–1, x!, ° ’ ”, °, r, g, ^(, x (, Percent %, logab, EXP  
 
15 16  
11  
12  
13  
14  
17  
18  
19  
20  
After turned on Data Frequency “FREQ” in calculator’s setup  
menu, the FREQ column will be added into the above screen.  
The followings are the maximum number of line for data input.  
Press the corresponding number key  
angle unit you need. Then the display will show the  
Indicator accordingly.  
,
or  
for the  
,
Random Number Generation  
Hyperbolic (sinh/ cosh/ tanh), Inverse Hyperbolic  
(sinh-1/cosh-1/tanh-1) functions  
: Convert rectangular coordinates (x, y) to polar  
for r, or  
Replay & Multi-statements  
Quotient and Remainder Calculations  
Display Values Exchange  
FUNCTIONAL SCIENTIFIC CALCULATIONS  
STATISTICAL CALCULATIONS  
Press to enter Statistical calculation mode and  
“STAT” indicator lights up.  
,
D
R
G
coordinates (r, θ); Press  
for θ.  
: Generate a random number between 0.000 and  
0.999. And the display result will be fraction format  
in Maths mode status.  
Replay Memory Function  
“Quotient” (Q) is the result of a division problem, “Remainder”  
(r) is the value remaining in an integer division problem.  
The calculated quotient value (Q) and remainder (r) will be  
stored into memory variables “C” and “D” automatically  
assigned.  
In Maths mode, pressing  
result value between fraction form Decimal form, form  
Decimal form, √ form Decimal form.  
to change the calculation  
Pressing  
enter sub-hyperbolic menu.  
Press  
to enter COMP mode.  
• Replay memory is only available in COMP mode.  
• After the calculation is executed, the calculation input and  
result will be stored in the replay memory automatically.  
Convert an angle unit between “Degree”, “Radian” and  
“Gradient” by pressing  
= 3.1415926535897932324  
Example in  
Key in operation  
Display  
Statistic type  
FREQ ON  
FREQ OFF  
Maths mode  
e = 2.7182818284590452324  
Press  
(Type) to select the calculation type.  
In Line mode, pressing  
result value between fraction form Decimal form, the other  
and √ calculation will display the decimal value only.  
to ONLY change the calculation  
Single Variable (only x input)  
2 Variable (x & y input)  
40  
26  
80  
40  
Pol(1, √3  
With rectangular  
coordinate (x=1, y=  
√3). Find Polar  
: Generate a random number between two specified  
positive integers. The entry is divided by “.”  
• Pressing  
input and result history.  
(or  
) can replay the performed calculation  
Square, Root, Cube, Cube Root, Power, Power Root,  
Reciprocal and Pi  
In Maths mode, press  
result.  
or  
to scroll a long calculation  
Statistical Type Selection  
r=2, þ=60  
• After obtaining the calculation result on the display,  
coordinate (r, θ) at  
degree mode  
There are 8 types of Statistical Calculation, after entered the  
Statistical Type Selection screen, then press the number to  
select the type of Statistic Calculation.  
X
Y
In Line mode, the quotient value (Q) and remainder (r) will be  
shown over 2 line.  
Only Quotient Value (Q) can continue to be used for the next  
calculation or be stored into memory variables.  
Input expression and display result value in Statistical Data  
Input screen are in Line mode (same as Comp mode with  
Line mode status).  
press  
• If the Indicator is on the right side of a calculation result  
or  
to edit the input expression of that result.  
2
Example in  
Example in  
Example in  
Key in operation  
Display  
Then, pressing  
value into the selected angle unit.  
,
, or  
will convert the displayed  
Example in  
display, you need to press  
the calculation.  
• Replay memory is cleared when you press  
1. Initialize calculator setting by  
2. Change from one calculation mode or display mode to  
other.  
and then  
or  
to scroll  
Key in operation  
Display  
Key in operation  
Display  
Line mode  
Key in operation  
Display  
Maths mode  
Maths mode  
60  
Maths mode  
After inputted the data, then press  
to store the value into  
2_|3+2  
Generate a random  
number between  
0.000 & 0.999  
Rand  
sinh2.5 – cosh 2.5  
= -0.08208499862  
statistical registers and display the value (max. 6 digits) in the  
cell. And you can press cursor key to move the cursor  
between each cell.  
: Convert polar coordinates (r, θ) to rectangular  
8_|3  
(In Line Mode)  
139  
1000  
coordinates (x, y); Press  
for y.  
for x, or  
Example in  
Example in Line  
Key in operation  
Display  
sinh(2.5) – cosh(  
-0.08208499862  
Key in operation  
Display  
2_|3+2  
Maths mode  
Convert 180  
mode  
35 ÷ 10 = 3 x 10 +5  
= 0.6217559776  
0.6217559776  
2.666666667  
R
Q…r(35, 10  
Q=  
R=  
180º  
180º  
Example in  
Generate an integer  
from range of 1 to  
100  
i~Rand(1,100  
Key in operation  
Display  
3. Press  
4. Press  
key.  
Q=3  
R=5  
3
Cosh-145  
cosh-1(45  
degree into radian  
and gradient  
Line mode  
Editing Statistical Sample Data  
Pressing Key  
1 (SD)  
Statistical Calculation  
One-variable statistics (x)  
33  
5
to power off machine.  
Rec(2, 60  
X=  
Y=  
With Polar coordinate  
(r=2, θ=60º).  
Find Rectangular  
coordinate (x, y) at  
degree mode  
Rad  
= 4.499686191  
4.499686191  
(Line mode)  
Replacing the Data in a cell  
(1) In Statistical Data Input screen, move the cursor to cell  
you want to edit.  
(2) Input the new data value or expression, and then press  
(180º =  
200Gad  
=
1
1.732050808  
Example in  
Key in operation  
Display  
)
2 (Lin)  
Two-variable, Linear regression (y= A+Bx)  
Two-variable, Quadratic regression (y=A +Bx + Cx2)  
*The value is only a sample, results will differ each time.  
Quotient value (Q) + 3  
= 6  
Ans+3  
Maths mode  
Multi-statements Function  
200  
6
3
5
= 7  
7
3 (Quad)  
4 (Log)  
• Use a colon  
together.  
to put two or more calculation input  
1
2
X
+2  
+2  
Permutation, Combination, Factorials and Random  
Number Generation  
1
8
3
Least Common Multiple and Greatest Common Divisor  
Two-variable, Logarithmic regression (y=AxBlnx)  
Two-variable, E exponential regression (y=AeBx  
)
Two-variable, ab Exponential regression (y=ABx)  
Two-variable, Power regression (y=AxB)  
Recall Quotient  
value (Q)  
C
D
Trigonometry Calculations  
Before using the trigonometric functions (except  
hyperbolic calculations), select the appropriate angle unit  
(In Maths Mode)  
• The first executed statement will have “Disp” indicator; and  
the “Disp” icon will disappeared after the last statement is  
being executed.  
Y
Logarithm, Natural logarithm, Antilogarithm and logab  
5 (e EXP)  
6 (ab EXP)  
7 (Pwr)  
LCM: Calculate the least common multiple among  
(maximum) three positive integers.  
GCD: Calculate the greatest common divisor among  
(maximum) three positive integers.  
2
3
1.732050808  
Deleting a line  
(1) In Statistical Data Input screen, move the cursor to line  
you want to delete.  
(2) Press  
Recall Remainder  
value (r)  
Permutation:  
Combination:  
Factorial:  
2.666666667  
Absolute Value Calculation  
Example in  
Example in  
(Deg/Rad/Gra) by pressing  
.
Key in operation  
Display  
8 (Inv)  
Two-variable, Inverse regression (Y=A+B/x)  
Maths mode  
Coordinate Conversion  
Angle Unit  
Setting  
Input Value Range  
for form result  
e-3 + 101.2 + In3 =  
Key in operation  
Display  
Angle Value Input  
Maths mode  
Inserting a line  
(1) In Statistical Data Input screen, move the cursor to the  
With polar coordinates, you can calculate and Display θ  
within –180º < θ ≤ 180º range. (Same as Radian and  
Gradient)  
Example in  
Example in  
Key in operation  
Display  
16.99733128  
Key in operation  
Display  
Maths mode  
Maths mode  
Statistical Data Input  
Deg  
Rad  
Gra  
Units of 15º  
Multiples of  
Multiples of  
Example  
Key in operation  
Display  
line that will be under the line being inserted.  
(Edit)  
(Line)  
1x12=12  
2+25=27  
using a multi-statement  
in Maths mode  
=2.573442045  
1
12  
1x12:2+25|  
After confirmed the calculation type of the above Statistical  
In Maths mode, press  
result.  
or  
to scroll the calculation  
3
3
radians  
(2) Press  
(3) Press  
LCM(15, 27, 39)  
= 1755  
LCM(15,27,39  
Example in  
16.99733128  
4
Type Selection screen or by pressing  
STAT mode, the following Statistical Data Input screen will be  
shown.  
(Data) in the  
Key in operation  
Display  
2.573442045  
Maths mode  
=0.5773502692  
50  
3
grads  
In Line mode, (x,y) or (r, θ) will be shown over 2 line.  
After conversion, the results will automatically be assigned to  
memory variables X and Y. Press  
results.  
Disp  
log381 – log1 = 4  
10P3 = 720  
10P3  
5C2  
5!  
Deleting All STAT Data Input  
1755  
1x12  
2+25  
1x12  
Engineering Notation  
Example in  
0.5773502692  
720  
10  
(1) Press  
(2) Press  
(Edit)  
or  
to show the  
90º = Radians = 100 Gradients.  
12  
27  
12  
1
÷8 =  
8
=0.3926990817  
(Del-A)  
5C2 = 10  
5! = 120  
Key in operation  
Display  
1
8
Example in  
Line mode  
Key in operation  
Maths mode  
Display  
Angle Unit Conversion  
-3  
1÷200 = 5x10  
(In Line Mode)  
1÷200  
D
Example  
Key in operation  
Display  
The calculator angle unit setting is “Degree”. Pressing  
enter the setup menu to change the unit to “Radian” or  
“Gradient”,:  
Degree Mode  
1-variable STAT  
2-variable STAT  
-3  
-6  
-3  
5x10  
5000x10  
5x10  
120  
0.3926990817  
Replay the previous  
calculation history 1 x  
12 = 12  
GCD(12, 24, 60)  
= 12  
GCD(12,24,60  
sin(60  
3
Sin 60 =  
2
3
2
1÷200  
1÷200  
REMARK  
sin(45)-1  
Some Calculation results, pressing  
the display value.  
Some display result conversion may take a long time.  
key will not convert  
1
12  
=Cosec 45º =  
Sin45o  
2
Rectangular Coordinates  
(Rec)  
Polar Coordinates (Pol)  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
Please use the regression to estimate the effectiveness  
3. Input the start, end & step information  
• Input the value, press  
screens  
• Input expression and display result value in following  
screens are in Line mode status  
• There are maximum of 30 x-values for generate function  
table. The “Insufficient Error” will be showed if you input  
the start, end, step value combination is more than 30  
x-values.  
Statistical calculation result in [4] S-SUM, [5] S-VAR, [6]  
S-PTS, [7] Reg  
Statistical Calculation Screen  
Statistical Calculation Example  
ADVICE AND PRECAUTIONS  
SPECIFICATIONS  
BATTERY REPLACEMENT  
When the display characters are dim or show the follow  
message on the screen, turn the calculator off and replace  
the lithium battery immediately.  
(estimate the value of y) if the advertisement expenses X=30,  
and estimate the advertisement expenses level (estimate the  
value of X1, X2) for effectiveness y = 50.  
to confirm on the following  
SD type Statistical calculation Example:  
After inputting the STAT Data, press  
Statistical Calculation screen.  
Statistical Calculation screen are in Line mode for  
input & output Display  
Use Statistical Menu to calculate the Statistical result.  
(S-SUM, S-VAR, S-PTS, Reg).  
to enter  
To calculate ∑x2, ∑x, n, x, x n, x n-1, minX, maxX of data: 75,  
85, 90, 77, 79 in SD mode (Freq: OFF)  
This calculator contains precision components such as  
LSI chips and should not be used in place subject to  
rapid variations in temperature, excessive humidity dirt  
or dust, or exposed to direct sunlight.  
The liquid crystal display panel is made of glass and  
should not be subjected to excessive pressure.  
When cleaning the device do not use a damp cloth or  
volatile liquid such as paint thinner. Instead, use only a  
soft, dry cloth.  
Do not under any circumstances dismantle his device. If  
you believe that the calculator is not functioning  
properly, either bring or mail the device together with the  
guarantee to service representative of Canon Business  
office.  
Never dispose the calculator improperly such as  
burning; it can create risks of personal injury or harm.  
You are suggested to dispose this product according to  
your national law.  
Power Supply  
: Single Lithium battery (CR2032 x 1)  
STAT  
STAT Type  
Value  
Symbol  
Operation  
sub-menu  
Power Consumption : DC 3.0V / 0.3mW  
2
2
S-SUM  
1 & 2 variable Summation of all x value  
∑x  
Battery Life  
: Approximately 3 years  
Key in operation  
Display  
Key in operation  
Display  
STAT  
Summation of all x value  
∑x  
(Base on 1 hour operation per day)  
: Approx. 7 minutes  
2
2
Auto power off  
2-variable Summation of all y value  
STAT only Summation of all y value  
Summation of xy pairs  
∑y  
LOW BATTERY  
Usable Temperature : 0° ~ 40°C (32°F ~ 104°F)  
Size: 171 (L) × 86 (W) × 18.75 (H) mm (with cover) /  
6-47/64” × 3-25/64” × 47/64” (with cover) /  
168 (L) × 80 (W) × 14.5 (H) mm (without cover) /  
6-19/64” × 3-5/32” × 37/64” (without cover)  
Weight: 128 g (4.33 oz) (with cover) /  
∑y  
Statistical Menu  
∑xy  
Please replace the lithium battery using the following  
procedures,  
(Quad)  
Display screen  
You should input:-  
(SD)  
3
3
In Statistical Data Input screen or Statistical Calculation  
Summation of all x value  
∑x  
Start?  
End?  
Input the lower limit of X (Default =1).  
1. Press  
to power off the calculator.  
screen, you can press  
Menu screen.  
to display the Statistical  
2
2
Summation of all x y pairs  
∑x y  
2. Remove the screw that securely fixes the battery cover  
in place.  
3. Remove battery cover.  
4. Remove the old battery with ball pen or similar sharp  
object.  
5. Load the new battery with positive “+” side facing up.  
Input the upper limit of X (Default = 5).  
4
4
Summation of all x pairs  
∑x  
95.59 g (2.23 oz) (without cover)  
*Specifications are subject to change without notice.  
*End value must be greater than the start value.  
S-VAR  
1 & 2  
Number of data sample  
n
Step?  
Input the increment step (Default =1).  
variable  
STAT  
Mean of the x values  
x
Population standard deviation of x  
Sample Standard Deviation of x  
x
WEEE AND EU BATTERY  
DIRECTIVE 2006/66/EC  
n
∑x2  
∑x  
n
1-variable STAT  
2-variable STAT  
In Function Table Result screen, you cannot edit the  
6. Replace the battery cover, screw, and press  
to initialize the calculator.  
,
x
n-1  
33120  
406  
5
30y  
content, and press  
return to Function Input screen.  
2-variable Mean of the y values  
STAT only Population standard deviation of y  
Sample standard Deviation of y  
y
European Union (and EEA) only.  
48.69615715  
STAT items  
Description  
f (x) = x3 + 3x2 2x  
y
n
These symbols indicate that this product is not to be disposed  
of with your household waste, according to the WEEE Directive  
(2002/96/EC), the Battery Directive (2006/66/EC) and/or your  
national laws implementing those Directives.  
This product should be handed over to a designated collection  
point, e.g., on an authorized one-for-one basis when you buy a  
new similar product or to an authorized collection site for  
recycling waste electrical and electronic equipment (EEE) and  
batteries and accumulators. Improper handling of this type of  
waste could have a possible impact on the environment and  
human health due to potentially hazardous substances that are  
generally associated with EEE.  
Your cooperation in the correct disposal of this product will  
contribute to the effective usage of natural resources.  
For more information about the recycling of this product, please  
contact your local city office, waste authority, approved scheme  
or your household waste disposal service or visit  
Example:  
the range  
to generate the function table for  
Caution: Risk of explosion if battery is replaced by an  
incorrect type. Dispose of used battery according  
to the instruction.  
50x1  
50x2  
Do replace the battery once very two years even it is not  
used frequently.  
, incremented in steps of 1.  
[1] Type  
[2] Data  
[3] Edit  
To enter the statistical calculation type screen  
To enter the statistical Data input screen  
y
n-1  
31.30538226  
-167.1096731  
S-PTS  
1 & 2 variable Minimum value of X  
minX  
Key in operation  
Display  
Battery Caution!  
Keep the Battery out of reach of children. If the battery is  
swallowed, contact a doctor immediately.  
Misuse of battery may cause leakage, explosion,  
damages or personal injury.  
Don’t recharge or disassemble the battery, it could  
cause a short circuit.  
x
STAT  
Maximum value of X  
maxX  
Electromagnetic interference or electrostatic discharge  
may cause the display to malfunction or the contents of  
the memory to be lost or altered. Should this occur,  
f(x)=  
To enter Edit sub-menu for editing STAT editor screen contents  
To enter S-Sum sub-menu (calculating sum)  
To enter S-Var sub-menu (calculating variable)  
To enter S-PTS sub-menu (calculating points)  
To enter Reg sub-menu (Regression calculation)  
81.2  
2-variable Minimum value of Y  
STAT only Maximum value of Y  
For non-Quad Regression coefficient A  
minY  
[4] S-SUM  
[5] S-VAR  
[6] S-PTS  
[7] Reg  
x
n
maxY  
f(x)= X3+3X2-2X  
press  
,
to restart the calculator.  
5.528109984  
6.180614856  
Reg  
A
B
r
FUNCTION (x,y) TABLE CALCULATION  
Input f(x) function to generate the function table for x & f(x).  
Steps to generate a Number Table  
1. Enter TABLE Mode  
x
n-1  
Reg  
Regression coefficient B  
Correlation coefficient r  
Estimated value of x  
Estimated value of y  
Never expose the battery to high temperatures, direct  
heat, or dispose by incineration.  
x
Quadratic Regression type Statistical Calculation Example:  
ABC Company investigate the effectiveness of the  
advertisement expense in coded units, the following data were  
obtained:  
• Press  
to enter the Table function calculation.  
y
Never leave a dead battery in the calculator as the dead  
battery may leak and cause damage to the calculator.  
Continue using the calculator in the low battery condition  
may have improper operation or the stored memory may  
be corrupted or lost completely. Keep the written records  
of important data all the time; and replace the battery as  
soon as possible.  
2. Function Input screen  
• Input function with X variable (  
Function Table Result.  
Reg  
For Quad Regression coefficient A  
A
B
C
x1  
x2  
y
) to generate  
Reg only  
Regression coefficient B  
Regression coefficient C  
Estimated value of x1  
Estimated value of x2  
Estimated value of y  
(EEA: Norway, Iceland and Liechtenstein)  
• All other variables (A, B, C, D, Y) and independent  
memory (M) act as the value.  
• Pol, Rec, Q…r function not able to used in Function  
Input screen.  
• The Function Table Calculation will change X-variable.  
Advertisement expenses: X  
Effectiveness: y (%)  
18  
38  
35  
54  
40  
59  
21  
40  
19  
38  
PUB NO. E-IE-410  
 
35 36  
31  
32  
33  
34  
37  
38  
39  
40  

Black Box Musical Instrument Amplifier AC2000A User Manual
Black Decker Pressure Washer 598111 01 User Manual
Black Decker Trimmer 90518528 User Manual
Blomberg Oven KSM 9520 A+ User Manual
Caloric Range EST399 User Manual
Canton Switch 3C16476CS User Manual
Capcom Video Games 13388340088 User Manual
Chamberlain Garage Door Opener 1270LMC User Manual
Char Broil Charcoal Grill 463250510 User Manual
Chicago Electric Portable Generator 66603 User Manual