Casio Computer Hardware DQ 970 User Manual

MA0506-EA  
Operation Guide DQ-970  
ILLUSTRATION  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
Press this button to illuminate the display for about five seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
2 Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
INVALID  
RESET  
OFF: Alarm off  
3 + / – buttons  
Use these buttons to change the alarm time or the setting that is flashing on the display.  
4 °C/°F button  
Press this button to toggle the temperature units between Celsius and Fahrenheit.  
5 SET button  
Use this button when setting the current time.  
6 RESET button  
Press this button to reset the clock after replacing its batteries.  
Buttons marked “INVALID” have no function.  
°C/°F  
SET  
INVALID  
RESET  
USING THE CLOCK  
1. Press the SET button (5) to cycle through the setting screens as shown below.  
Normal Timekeeping Screen  
°C/°F  
SET  
Year Setting Screen  
Month and Day  
Setting Screen  
Time Setting Screen  
12-hour/24-hour  
Timekeeping Screen  
2. While the screen you want is displayed, use the + and buttons (3) to change the flashing digits.  
Holding down + or changes the flashing digits at high speed.  
You can set the year in the range of 2000 to 2039. The day of  
the week is set automatically in accordance with the date  
setting.  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
+
Pressing + or while the Time Setting Screen is on the display  
Press to  
Press to  
clock.  
causes the seconds count to be reset to 00.  
decrease  
the flashing  
digits.  
increase  
the flashing  
digits.  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
°C/°F  
SET  
Each press of + or while the 12-hour/24-hour Timekeeping  
Screen is on the display toggles between 12-hour and 24-hour  
timekeeping.  
Alarm Off  
Snooze Alarm On  
Snooze on  
indicator  
Alarm time  
PM  
indicator  
Date  
(month - day)  
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.  
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for  
about three minutes without performing any operation.  
Day of the week  
Current time  
(Hour, minutes,  
seconds)  
Alarm on  
indicator  
Current  
temperature  
Current  
humidity  
1
 

Black Decker Trimmer NHT518 User Manual
Blaupunkt Car Stereo System Hamburg CD70 User Manual
Bosch Power Tools Cordless Saw 3924 24 User Manual
Bostitch Staple Gun CR1000E User Manual
Bowers Wilkins Speaker VM6 User Manual
Breville Blender BLR50 User Manual
BridgeWave Switch AR80 User Manual
Cateye Bicycle Accessories CC HB100 User Manual
Chicago Electric Grinder 97588 User Manual
Cisco Systems Cordless Telephone 7931G User Manual