Casio Watch MA1104 EA User Manual

MA1104-EA  
Operation Guide ANALOG(MAF)  
Your watch may differ somewhat from the one shown in the illustration.  
Notes  
Some water resistant models are equipped with a screw lock  
crown.  
With such models, you must unscrew the crown in the direction  
noted in the illustration to loosen it before you can pull it out. Do  
not pull too forcibly on such crowns.  
Also note that such watches are not water resistant while their  
crowns are loosened. Be sure to screw the crowns back in as  
far as they will go after making any setting.  
[
Modules 5128, 5180, 5199, 5206, 5207, and 5218]  
To set the time  
First click (Day setting)  
Crown  
(Normal position)  
1. When the second hand is at 12 o’clock, pull out the  
crown to the second click to stop it.  
2. Set the hands by rotating the crown. Move the  
minute hand four or five minutes past the setting  
you want, and then back them up to the setting.  
3. Push the crown back in on a time signal to resume  
timekeeping.  
To set the day  
Avoid setting the day between 9:00 p.m. and 1:00  
a.m. The day may not change in the following day if  
you do.  
Second click  
(Time setting)  
1. Pull out the crown to the first click.  
2. Set the day by rotating the crown.  
3. Push the crown back in to its normal position.  
[Modules 5125, 5167, 5223, and 5237]  
To set the time  
First click  
1. When the second hand is at 12 o’clock, pull out the  
crown to the second click to stop it.  
(Day, day of week setting)  
2. Set the hands by rotating the crown. Move the  
minute hand four or five minutes past the setting  
you want, and then back them up to the setting.  
3. Push the crown back in on a time signal to resume  
timekeeping.  
Crown  
(Normal position)  
To set the day and day of the week  
Avoid setting the day and day of the week between  
9:00 p.m. and 5:00 a.m. The day and day of the  
week may not change in the following day if you do.  
1. Pull out the crown to the first click.  
Second click  
(Time setting)  
2. Set the day by rotating the crown counterclockwise.  
3. Set the day of the week by rotating the crown clockwise.  
4. Push the crown back in to its normal position.  
For watch with the elapsed time bezel  
Rotate the elapsed time bezel to align the  
minute hand.  
mark with the  
After certain amount of time elapsed, read the graduation on the  
elapsed time bezel which the minute hand points to.  
The elapsed time is indicated.  
Elapsed time bezel  
Specifications  
Accuracy at normal  
temperature  
(per month)  
Module No.  
Battery type  
Battery life  
5125/5128/5206/  
5207/5237  
20 seconds  
SR626SW  
Approx. 3 years  
5167  
5180/5199/5223  
5218  
20 seconds  
20 seconds  
20 seconds  
SR920SW  
SR621SW  
SR616SW  
Approx. 5 years  
Approx. 3 years  
Approx. 2 years  
1
 

Bissell Vacuum Cleaner 1698 User Manual
Black Decker Cordless Drill 90506902 User Manual
Black Decker Drill 1042 User Manual
Black Decker Lawn Mower LST201 User Manual
Blanco Indoor Furnishings 500 336 User Manual
Bosch Appliances Washer WAS24460UC User Manual
Bradford White Corp Water Heater TTW4 User Manual
Briggs Stratton Portable Generator 030209 2 User Manual
Canon Printer 8746B002 User Manual
Chamberlain Garage Door Opener 1145 1 3HP User Manual