Model: LCD3202A
Please read this User Manual carefully to ensure the proper use of this product and
keep this manual for future reference
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1.Read these safety instructions.
2.Keep these safety instructions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
3.Heed all warnings.
4.Follow all safety instructions.
CAUTION
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
7.Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators ,
stoves, or other apparatus (including amplifiers)that
produce heat.
The symbol indicates that dangerous voltages
constituting a risk of electric shock are present
within this unit.
9.Protect the power cord from being walked on or
pinched particularly at power outlets, and the point
where they exit from the apparatus.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
10.Only use attachments/accessories specified by the
manufacturer.
WARNING:
11.Unplug this apparatus during lightning storms or
when unused for long periods of time.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
12.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture , does not operate normally,
or has been dropped.
13.Apparatus must not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, should be placed on the apparatus.
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
D
im:515*320mm(
Do not trap the power supply cord under the television
receiver.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
SAFETY AND WARNINGS
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Thank you very much for purchasing this TV. To enjoy
your product from the very beginning, read this manual
carefully and keep it handy for easy reference.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected .
-Consult the dealer or an experienced radio TV technician
for help.
INSTALLATION
Locate the TV in the room where light does not strike
the screen directly.
Shield cables must be used with this unit to ensure
compliance with the Class B FCC limits.
Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid extremely warm locations to prevent possible
damage to the cabinet or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz.
Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
CAUTION
Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna
cord to prevent damage to your TV. All repairs to this TV
should only be performed by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected
to MAINS socket outlet with a protective earthing connection
MAINS plug or appliance coupler of the apparatus is used
as disconnect device, it should remains readily operable
Warning: Change or modifications to this unit not expressly
by the part responsible for compliance could void the user's
authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
-4-
INTRODUCTION
Accessories
Main features
Used as Television, display terminal,PC display
High luminance,wide viewing angle
AC Power Cord.........................
1
1
1
2
Infrared Remote Control...........
User s Manual ........................
3
4
BTSC
ATSC digital signals and NTSC analog signals TV.
Battery(AAA)..........................
Main parameter
Viewing Picture Size(diagonal)
Resolution:
32inch
1366x768
16:9
Aspect Ratio:
TV System:
ATSC Digital system and NTSC Analog system
NTSC/PAL/SECAM
Video Signal System:
Receiving Channel:
Cable :1-135/ Air: 2-69(ATV&DTV)
Power consumption:
170W
Input Power Voltage:
AC 100V-240V 50/60Hz
2x8W
Audio Output Power(THD 7%):
Rear High-Definition Multimedia Interface(HDMI) Input
Side HDMI Input
x 2
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 3
x 1
x 1
x 1
Rear S-Video Input
YCb(Pb)Cr(Pr) Input
Side S-Video Input
Rear Analog Audio Output
Rear Coaxial SPDIF Output
Analog RGB(VGA) Input
Rear Composite Video Input
Rear Audio Input
Side Composite Video Input
Side HEAD PHONE Output
Rear Composite Video Output
Horizontal definition(TV line)
Composite Video Input >=350
Video Input
>=400
>=400
YCb(Pb)Cr(Pr)
-5-
INSTALLATION
Front panel
KEYBOARD
1
SOURCE Display the
SOURCE
input source menu.
MENU Display main
MENU.
2
MENU
CH+
3
CH+/CH-:In TV mode
press CH+ or CH- to
change the channel up and
down.In MENU mode, press
CH+ or CH- to select
items .In standby mode,
press CH+ or CH- to
turn on the TV.
3
4
CH-
VOL+
VOL-
2
1
4
VOL+/VOL-:Adjust
sound level.In MENU mode,
press VOL+ or VOL-
to adjust the item that you
selected.
30 30
1
4
7
2
5
8
3
6
9
1: Remote control sensor.
2: Indicator LED: GREEN
RED
SIDE PANEL(LEFT)
0
POWER ON.
STANDBY.
+
+
V
O
L
CH
_
_
All the terminals are(from up to down):
3: Key board
HEAD PHONE, S-VIDEO2, AV2, HDMI3.
HEADPHONE
4: Power: Press this button to turn the unit
ON from STANDBY mode.
Press it again to turn the set back to
STANDBY.
NOTE:
AV2 and S-VIDEO2 share the audio input
channel. When HDMI3 port get DVI signal,
the AV2 Audio channel will change to
receive the audio from HDMI3 port.
S-VIDEO2
VIDEO
AV2
L
R
REAR AV Connection
10 11
12
13
1
2
3
4
5
6
7
8
9
14
1. ANT
6. YPbPr AUDIO INPUT
7. PC AUDIO INPUT
8. YPbPr INPUT
9. AV1 INPUT
10. S-VIDEO1 INPUT
11. VGA INPUT
2. AUDIO OUTPUT
3. SPDIF OUTPUT
4. VIDEO OUTPUT
5. AV1/S-VIDEO1 AUDIO INPUT
Note:
1.AV1 and S-VIDEO1 share one audio channel.
12. HDMI2 INPUT
13. HDMI1 INPUT
14. AC POWER INPUT
2. When HDMI1 port get DVI signal, the PC Audio channel will change to receive the audio from HDMI1 port
3. When HDMI2 port get DVI signal, the YPbPr Audio channel will change to receive the audio from HDMI2 port.
4.AV OUTPUT :
When the source are AV1,AV2(side) S-VIDEO1,S-VIDEO2(side),ATV,the AV OUTPUT Channel reproduce the input
signals accordingly
-6-
INSTALLATION
PC
STEPS:
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to VGA mode.
4.Power on the VGA.
This sequence is very important.
2
1
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
720*400
640*480
70
60
31.47
31.47
640*480
640*480
800*600
800*600
72
75
56
60
37.86
37.50
5
6
35.156
37.88
7
8
9
800*600
800*600
1024*768
72
75
60
48.08
46.88
48.36
10
11
1024*768
1024*768
70
75
56.48
60.02
12
13
1280*1024
1280*1024
60
75
63.98
80.00
-7-
INSTALLATION
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-8-
INSTALLATION
AV EQUIPMENT
This TV provides two groups of AV ,two S-Video,one group of YPbPr for convenient connection
to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to
the owner s manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
VIDEO EQUIPMENT with YPbPr
To au dio
outputs
with SPDIF Input
terminal
with S-video
Terminal
From Coaxial SPDIF
output
R
G
B
Pr
Y
G
B
R
W
R
To s-video
output
VIDEO EQUIPMENT
VIDEO RECORDER
Pb
Y
W
R
Black (s-video)
White(audol L)
Red(audio R)
G
Y
B
W
R
W
R
R
2
1
W
R
Y
W
R
Y
With VIDEO Input Terminal
Y
TO VIDEO
Iutput
W
R
To audio Input
HDMI
To audio
Output
With VIDEO
terminal
HDMI cable not included
To video
output
VIDEO EQUIPMENT
HEADPHONE
S-VIDEO2
VIDEO
AV2
L
R
HDMI
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
NOTE:
AV2 and S-VIDEO2 share the audio input channel.
When HDMI3 port get DVI signal, the AV2 Audio channel will change to receive the audio
from HDMI3 port
-9-
REMOTE CONTROL
1:POWER
To set the TV standby or on.
2:NUMBER KEY:
POWER
MUTE
For direct access to program.
3:MENU
To display TV menu or to return to the previous menu.
4: CURSOR
To move within the menu.
5: EXIT
Used to exit menu.
11
12
1
2
RECALL
1
4
2
5
8
3
6
9
7
0
6: VOL+/-
To adjust sound level.
7: P.M
To switch picture mode.
8: MTS/SAP
MENU
SOURCE
13
14
3
4
ENTER
Switch the sound stereo, SAP and mono.
9: SLEEP
Set time to turn off the TV.
10:V-CHIP
Setting the V-CHIP level control.
11:MUTE
To disable or enable the sound.
12: RECALL
15
16
5
6
EXIT
+
TV DISPLAY
+
S.M
P.M
17
VOL
_
CH
_
To access the previously viewed program.
13: SOURCE
To display or exit TV input source menu.
14: ENTER
Confirms selection.
15: TV DISPLAY
Displays/removes the program Information
16: S.M
To switch sound mode.
17: CH+/CH-
7
8
MTS/SAP
ASPECT
18
SLEEP
V-CHIP
FAV
CC
9
19
22
10
CH LIST
EPG
20
HDMI
TV
AV
SVIDEO
21
23
24
29
25
26
27
28
PAGE UP PAGE DOWN
YPbPr
VGA
To access the next or previous Program.
18: ASPECT
To change picture aspect .
19: CC
EPG
30
Enable or disable the CC function.
20:CH LIST:
Used to display the channel list
21:FAV:
Insert Batteries Into the Remote Control
Used to access your favourite channels in digital TV mode.
22:EPG:
1
2
3
Display all the information of DTV programs.
23.HDMI:
Hot key directly go to HDMI source.
24:SVIDEO:
Hot key directly go to SVIDEO source.
25:TV:
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the
polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Hot key directly go to TV source.
26:AV:
Hot key directly go to AV source.
27: YPbPr:
Hot key directly go to YPbPr source.
28: VGA:
Hot key directly go to VGA source.
29: PAGE DOWN/PAGE UP
In EPG mode, use this key to page up/down the EPG
information.
Operation is unsteady or erratic. Sometimes the TV
set does not function with Remote Control Unit.
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the
remote control is not to be used for long time.
30.COLOR KEYS: Reserved keys
-10-
OPERATION
3.TIMER MENU
1. PICTURE MENU
The third item of the MENU is TIMER MENU.
You can adjust time here.
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
Press
to exit.
to select, press
to adjust, press MENU
Press
to exit.
to select, press
to adjust, press MENU
Audio
Timer
Setup
Channel
Picture
P.G
Picture
P.G
Channel
Audio
Setup
Timer
Standard
Picture mode
Sleep timer
Time zone
Off
Contrast
Brightness
Color
50
50
50
0
Pacific
Off
Daylight Saving Time
Clock
1999/12/31 04:03PM
Tint
Sharpness
Color Temp.
50
Normal
Select
Adjust
Menu Exit
Select
Adjust
Menu Exit
Note:
1).Sleep Timer: adjust this item , you can set the
sleep timer .
Note:
If you want to adjust contrast, brightness, color,
and sharpness , the picture mode must return to
personal status.
The item of Time zone, the item of Daylight Saving
Time and the item of Clock are available in ATSC
program
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
4. SETUP MENU
Press
to exit.
to select, press
to adjust, press MENU
The forth item of the MENU is SETUP MENU.
You can setup system here.
Press
to exit.
to select, press
to adjust, press MENU
Picture
Audio
P.G
Timer
Setup
Channel
Standard
Sound mode
Bass
50
50
50
Treble
Balance
Surround
AVC
Off
Off
Picture
Audio
Channel
Timer
Setup
P.G
SPDIF Type
PCM
Audio language
English
Menu language
Transparency
English
On
Aspect
Select
Adjust
Menu Exit
16:9
Noise Reduction
Advanced
Weak
Closed caption
Note:
The item of Audio language is available in ATSC
program.
XVS
Off
Restore Default
Select
Adjust
Menu Exit
Note:
Restore Default: Reset all the settings to default
value.
-11-
OPERATION
1). Advanced: In PC Mode is available.
5. P.G MENU
Press button to select Advanced item , Press
button, the screen will display as follow:
The fifth item of the MENU is P.G MENU.
You can setup Parental Control here.
Press
to exit.
to select, press
to adjust, press MENU
Parent Control: input the password, it will go into
Parental Control menu. Factory default password
is 6666.
Picture
H-pos
Audio
Channel
Timer
Setup
P.G
50
50
50
50
V-pos
Clock
Phase
Auto
Picture
Audio
Setup
Channel
Timer
P.G
Enter password
----
Select
Adjust
Menu Exit
(1).H-Pos:Adjust the horizontal position of the screen.
(2).V-Pos:Adjust the vertical position of the screen.
(3).Clock: Fine tune the screen width.
Select
Adjust
Menu Exit
(4).Phase: Fine tune the phase of the screen. Usually
don`t adjust this item.
(5).Auto: Auto adjust to fit the screen.
5.1 .Input the correct password ,the screen will display
as follow:
2). Closed Caption: switch close caption mode.
Press
Press
button to select Closed Caption item,
button, the screen will display as follow:
Picture
Audio
Setup
Channel
Timer
P.G
Change password
P.G switch
US
On
Canada
Picture
Audio
P.G
Off
Channel
Timer
Setup
RRT setting
Reset RRT
CC Mode
Basic Selection
CC4
Advanced Selection
Service 3
Select
Adjust
Menu Exit
Option
1). Change Password: Press button, the screen will
display as follow:
Select
Adjust
Menu Exit
(1):Advanced Selection: only ATSC program is available.
(2):Option:Used to edit CC font.
Picture
Audio
Setup
Channel
Timer
P.G
New password
----
----
Press
button, the screen will display as follow:
Confirm password
Picture
Audio
Channel
Timer
Setup
P.G
Mode
Custom
Font style
Font size
Default
Default
Default
Select
Adjust
Menu Exit
Font Edge style
Font Edge color
FG color
Default
Default
Default
Default
Default
1).New Password: Input the new password
BG color
FG opacity
BG opacity
2).Confirm Password: Input the new password again
Select
Adjust
Menu Exit
NOTE: Only ATSC program is available.
-12-
OPERATION
2).MPAA:switch the movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
5.2 P.G switch:
When the Parental Control switch is ON, the below
options can be adjusted.
Rating
Description
5.3 US: Press
follow:
button, the screen will display as
G
General audiences, All Ages admitted
Parental Guidance suggested. Some material may not be
Suitable for children.
PG
PG-13
R
Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
Setup
Picture
Audio
Timer
P.G
Channel
Age
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
TV
X
MPAA
NC-17
X
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
Select
Adjust
Menu Exit
5.4 Canada: Press
displayed as follow:
button, the screen will be
1):TV: Press button, the screen will display as
follow:
Picture
Audio
Setup
Channel
Timer
P.G
14+
Canada English
Canada French
E
Picture
Audio
Setup
S
Channel
Timer
P.G
TV rating
FV
ALL
V
L
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Select
Adjust
Menu Exit
Block
Press ENTER to lock or unlock
1): Canada English: switch the english rating control
level:E,C,C8+,G,PG,14+,18+.
Select
Adjust
Menu Exit
Description
Rating
Content
FV
(Fantasy (Violence) (Sexual
V
S
L
(Adult
D
(Sexually
E
C
Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
Rating Content
violence)
situation) language) suggestive
dialog)
Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
securityand well-being.
TV-Y (All
children)
TV-Y7(Direct to
order children)
C8+ Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
X
Suggested
age
TV-G(General
audience)
G
General: Considered acceptable for all age groups, Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
TV-PG(Parental
Guidance
suggested)
Age
X
X
X
X
X
X
X
X
X
X
X
TV-14(Parents
strongly
cautioned)
PG Parental Guidance: Intended for a general audience, but may not be
suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
TV-MA(Mature
audience only)
14+ Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline But it must be integral to the
devel opment of plot or character. Language usage could be profane
and nudity , present within the context of theme.
And use ENTER key to switch lock/ unlock Parental
Control feature.
18+ Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of secretary and nudity.
-13-
OPERATION
1). Air/Cable: select air TV signal or cable TV signal.
2). Auto Scan: If it's the first time using the TV, it
should scan all the TV channels first,
2).Canada French: switch the French-rating control
level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.
press the
menu :
button to confirm, you will see below
Rating
Description
E
Exempt programming
G
General :All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner .
Picture
Audio
Setup
P.G
Channel
Timer
8ans+ General but inadvisable for young children :May be viewed by a
wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and
real situations. Recommended for viewing with parent.
Start to scan
Age
13ans+ Over 13 years: Could contain scenes of frequent violent scenes
and in tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
Select
Adjust
Menu Exit
5.5 RRT Setting: in ATSC digital TV mode, it could be
adjusted
A: Start to Scan: press the
will see below menu which indicates auto search is
in process.
button to confirm, you
5.6 Reset RRT: Press
displayed as follow:
button, the screen will be
Picture
Audio
Setup
Channel
Timer
P.G
Audio
Picture
Setup
P.G
Channel
Timer
Are you sure?
NO
YES
RF CH:
FOUND:
4
0
Select
Adjust
Menu Exit
Select
Adjust
Menu Exit
6. Channel MENU
3). Favorite: Press
favorite channel .
4). Show/Hide: Press
currently channel.
button to choose/delete the
button to display or hide
The sixth item of the MENU is CHANNEL MENU.
You can adjust digital and analoge TV channel here .
Press
to move, press
to adjust.
5). Channel NO. :Display the currently channel number.
button to edit currently
6). Channel Lable: Press
channel name.
Picture
Audio
Timer
Setup
P.G
Channel
7). DTV Signal: Display DTV signal intension. It can't be
selected and adjusted.
Cable
Air/cable
Auto Scan
Favorite
Show/Hide
2-1
Channel NO.
Channel Lable.
DTV signal
:
Select
Adjust
Menu Exit
-14-
Trouble shooting
Trouble phenomenon Symptom
Picture
Inspection Check
Audio
antenna position, direction
or connection
Snow
Ghost
Noise
antenna position, direction
or connection
Normal audio
electronic equipment,car/
motorcycle,fluorescent light
Interference
Noise
Volume(check if mute is
activated or if the audio system
connections are not correct)
Normal Picture
Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No picture
No colour
Mute
Normal audio
Colour control
retune channel
Picture
breaking up
Normal audio
or weak
No colour
TVsystem
Noise
The LCDTV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.
-15-
|