Grizzly Biscuit Joiner H8361 User Manual

MODEL H8361/H8362  
60"/ 72"SUPER HEAVY-  
DUTY WORKBENCHES  
INSTRUCTIONS  
Introduction  
F
Sized to fit the needs of any shop, these work-  
benches feature laminated birch construction for  
strength and stability.  
E
A
B
Specifications  
H8361  
Construction .............................. Laminated Birch  
Shipping Weight .....................................248 lbs.  
Dimensions ............................60"L x 30"W x 3"T  
Table Height Above Floor ..............................38"  
C
D
Figure 1. Model H8361/H8362 inventory.  
Tail Vise Width ............................................1434  
"
Tail Vise Max. Capacity....................................7"  
H8362  
Model H8361  
Construction .............................. Laminated Birch  
Shipping Weight ......................................315 lbs.  
Dimensions.............................72"L x 36"W x 3"T  
Table Height Above Floor ..............................38"  
Tail Vise Width ............................................1734  
"
Tail Vise Max. Capacity....................................7"  
Model H8362  
Inventory  
A. Bench Top.................................................. 1  
B. Right Side Leg............................................ 1  
C. Left Side Leg.............................................. 1  
D. Cross Braces.............................................. 2  
E. Tail Vise...................................................... 1  
F. Vise Wood Block........................................ 1  
G. Hardware and Tools (not shown)  
Figure 2. Model H8361 and H8362.  
—Flat Washers 516".................................. 12  
—Machine Screws 516"-18 x 4" .................. 8  
—Dowel Nuts 516"-18.................................. 8  
—Wood Screws 516" x 21/2"......................... 4  
—Wood Screws #5 x 1716"......................... 2  
—Cotter Pin................................................ 1  
—Hex Wrench 5mm................................... 1  
CoPyRigHT © MAy, 2008 By gRizzLy iNDuSTRiAL, iNC. REViSED MAy, 2009 (BL)  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIzzLY INDUSTRIAL, INC.  
(FoR MACHiNES MFg SiNCE 5/09 #BL10746 PRiNTED iN CHiNA  
 
1
4. using an 8" drill bit, drill 1716" deep holes  
through the vise plate mounting holes and  
into the wood block.  
To reduce risk of serious injury when using  
this bench:  
5. Secure the vise plate to the wood block with  
two #5 x 1716" wood screws (Figure 6).  
Do not apply an unbalanced load that  
could result in the workbench tipping  
over.  
6. Place a cotter pin in the end of the threaded  
rod, bending it tightly around the shaft to  
keep it from threading out of the vise support  
block.  
Do not stand or climb on the  
workbench.  
Avoid applying excessive force when  
using workbench vise and dogs. Be sure  
workpiece is securely locked in place.  
Always wear eye protection.  
Keep your work area clean, uncluttered  
and well lit. Do not work on or place  
workbench legs on floor surfaces that  
are slippery from sawdust, oil, water, or  
wax.  
Maintenance  
To avoid damaging it, do not store the workbench  
outside, or in an overly damp or extremely dry  
location.  
If you need help with your new item, call our Tech  
Support at: (570) 546-9663.  
Keep visitors and children at a safe  
distance away from the work area,  
especially when you are operating a  
power tool.  
Do not wear loose clothing, gloves,  
neckties, or jewelry. Secure long hair,  
button all long sleeve shirts, and wear  
non-slip footwear.  
-3-  
H8361/H8362 (Mfg. 05/09+)  
 
H8361/H8362 Parts Breakdown  
10  
11  
5
1
12  
6
9
2
8
3
6
7
4
H8361 Parts List  
REF PART #  
DESCRIPTION  
REF PART #  
DESCRIPTION  
1
2
3
4
5
6
PH8361001  
PH8361002  
PH8361003  
PH8361004  
PH8361005  
PW07  
BENCH TOP  
7
PH8361007  
PH8361008  
PH8361009  
PH8361010  
PH8361011  
PAW05M  
MACHINE SCREW 5/16"-18 X 4"  
DOWEL NUT 5/16"-18  
RIGHT SIDE LEG  
LEFT SIDE LEG  
CROSS BRACE  
TAIL VISE  
8
9
WOOD SCREW 5/16" X 2-1/2"  
WOOD SCREW #5 X 1-7/16"  
COTTER PIN  
10  
11  
12  
FLAT WASHER 5/16  
HEX WRENCH 5MM  
H8362 Parts List  
REF PART #  
DESCRIPTION  
REF PART #  
DESCRIPTION  
1
2
3
4
5
6
PH8362001  
PH8362002  
PH8362003  
PH8362004  
PH8362005  
PW07  
BENCH TOP  
7
PH8361007  
PH8361008  
PH8361009  
PH8361010  
PH8361011  
PAW05M  
MACHINE SCREW 5/16"-18 X 4"  
DOWEL NUT 5/16"-18  
RIGHT SIDE LEG  
LEFT SIDE LEG  
CROSS BRACE  
TAIL VISE  
8
9
WOOD SCREW 5/16" X 2-1/2"  
WOOD SCREW #5 X 1-7/16"  
COTTER PIN  
10  
11  
12  
FLAT WASHER 5/16  
HEX WRENCH 5MM  
-4-  
H8361/H8362 (Mfg. 05/09+)  
 

Graco Baby Swing PD144991A User Manual
Greenway Home Products Indoor Fireplace MM255CH User Manual
Hamilton Beach Convection Oven 840156300 User Manual
Harbor Freight Tools Trimmer 90757 User Manual
Harman Kardon Home Theater System HKTS 18 User Manual
Honeywell Dehumidifier H808C User Manual
Hotpoint Washer Dryer WF 561 P User Manual
Hunter Fan Dollhouse 20730 User Manual
Husqvarna Lawn Mower 11 Bio User Manual
Hyundai Freezer BD 100G User Manual