Harbor Freight Tools Paint Sprayer 91603 User Manual

GRAVITY SPRAY GUN  
HOLDER  
91603  
ASSEMBLY AND OPERATING INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
®
Copyright © 2004 by Harbor Freight Tools . All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
 
Unpacking  
When unpacking, check to make sure the following parts are included that are listed  
on Page 4.If any parts are missing or broken, please call Harbor FreightTools at the  
number on the cover of this manual.  
Assembly and Usage Instructions  
The Gravity Spray Gun Holder holds most cup style GRAVITY FEED spray guns.  
1. At one end of the Steel Rod (4), attach Ring Holder (3) using a Washer (2) on  
each side of the Ring Holder and Tighten with Nut (1).This Ring Holder is used  
to hold a strainer (not included) as an aid when filling the spray gun cup with  
paint.  
2. Attach the other end of the Steel Rod (4) through the Holding Bracket (6) using  
Washers (2) and Nuts (1). Attach Base (7) to the Holding Bracket (6) using  
Bolts (5), Washers (2), and Nuts (1). See Figures 1 and 2.  
3. Your spray gun will rest on the Holding Bracket (6) as needed. Be careful not  
to tip or bump the holder as it may fall.  
IMPORTANT:  
Refer to the manual of the paint spray gun and paint you will use  
for necessary warnings and instructions before use.  
Ring Holder (3)  
Holding  
Bracket (6)  
Steel Rod (4)  
Base (7)  
Washer (2)  
Holding  
Bracket (6)  
Bolt (5)  
.
Figures 1  
Figures 2  
Maintenance  
1.  
2.  
Keep indoors to avoid rust.  
Wipe surfaces with a damp cloth or paint thinner, depending on what type paint was  
used.Rinse off and dry thoroughly.Use Caution: Paint thinner is flammable and must be  
disposed of and stored properly.  
For technical questions, please call 1-800-444-3353.  
SKU 91603 Download from Www.Somanuals.com. All Manuals Search And DownPloaadg.e 3  
Parts List  
PART #  
DESCRIPTION  
QTY  
Nut  
1
2
3
4
5
6
7
4
8
1
1
2
1
1
Washer  
Ring Holder  
Steel Rod  
Bolt  
Holding Bracket  
Base  
Part 1  
Part 2  
Part 3  
Parts Illustration  
Part 4  
Part 1  
Part 6  
Part 5  
Part 7  
Part 1  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS  
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR  
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE  
IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO  
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR  
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN  
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES  
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT  
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF  
REPLACEMENT PARTS THERETO.  
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as  
replacement parts.  
For technical questions, please call 1-800-444-3353.  
SKU 91603 Download from Www.Somanuals.com. All Manuals Search And DownPloaadg.e 4  

Graco Inc Paint Sprayer 231 353 User Manual
Harbor Freight Tools Air Compressor 67697 User Manual
Harbor Freight Tools Sander 34202 User Manual
Harbor Freight Tools Saw 94443 User Manual
Hasbro Games 60 044 User Manual
Honeywell Humidifier HE360A User Manual
Hotpoint Range RA513 User Manual
HP Hewlett Packard Computer Monitor 1910 User Manual
HTC Cell Phone S740 User Manual
IBM All in One Printer 2785+01 User Manual