Honeywell Garage Door Opener 5828 5828V User Manual

K0021V2 2/06 Rev. A  
ADEMCO 5828/5828V  
Wireless Bidirectional Fixed-Word Keypads  
USER GUIDE  
GENERAL INFORMATION  
KEYPAD KEYS  
These keypads include 12-operational keys, as well as  
four Special Function keys that are backlit for ease of  
use when the keypad is active. To access the keypad  
keys, simply open the swing-down door by applying  
outward pressure on the door release slot on the right  
side.  
The ADEMCO 5828 and 5828V are wireless keypads  
that can be used to operate and get status from your  
security system. The 5828 and 5828V have the  
following features (voice annunciation features apply  
only to the 5828V):  
Can be used to arm/disarm, and perform other  
system operations.  
Panic alarms are activated by pressing the key pairs  
shown in the table below. Special Function keys A, B,  
and C, can be programmed by your installer to provide  
the same alarms by pressing a single key and holding it  
down for 3-seconds, or can be assigned other system  
operations. (Ask your installer to fill in the tables below  
with assigned functions of these keys).  
Can display and/or annunciate system status.  
Can automatically display and/or annunciate a  
change in system status if AC powered (e.g., for an  
alarm, the keypad will announce the type of alarm  
(fire or burglary) and location (e.g. kitchen window).  
The 5828V Message Center can be used to record  
and play back a voice memo to yourself, or leave a  
message for a family member.  
Key  
Pairs  
Function  
Keys  
Function  
Function  
A
B
C
D
[1] & []  
[] & [#]  
[3] & [#]  
Can be battery- or AC-powered (AC-powered units  
have several advantages, described below).  
Battery-Powered Operation: When powered by  
battery, the keypad must first be activated by pressing  
any numbered key. The keypad will display the current  
system status within a few seconds. You may at any  
time before or after receiving status, arm, disarm, send  
a panic alarm, or perform other system operations. The  
keypad becomes inactive when no keys have been  
pressed for 15 seconds, and must be reactivated to  
display the current status.  
SOUNDER  
The keypad’s built-in sounder pulses three times and  
then pauses (repeatedly) for fire alarms, and generates  
a continuous two-tone sound for burglary alarms.  
HOW TO GET SYSTEM STATUS  
When Powered By Battery  
Pressing any key will turn on the keypad. However, to  
specifically request system status from the control,  
simply press the [] key. Status will be displayed  
within a few seconds.  
AC-Powered Operation: When powered by the  
optional AC adapter, the keypad remains active at all  
times. If AC power is lost, the keypad reverts to  
battery-powered operation until AC power is restored  
and a new status request is made ([] key).  
When Powered By AC Power  
NOTE: Whether the unit is powered by battery or AC,  
the 5828/5828V may take a few seconds to display  
and/or annunciate the new status after pressing the []  
key.  
On AC powered units you can get the status by viewing  
the display. The keypad is automatically updated when  
a change in system status takes place (arming,  
disarming, trouble, etc.).  
HOW TO PROGRAM OR CHANGE YOUR 4-DIGIT  
SECURITY CODE IF USING QUICK KEY FUNCTIONS  
In order to Quick Arm the system using this keypad,  
you will need to program your own 4-digit security code  
into the keypad. This code must match a code that has  
already been programmed into your control panel. To  
program the 4-digit code, perform the following steps:  
5828V  
ONLY  
A
OFF  
MAX  
AWAY  
TEST  
CODE  
STAY  
BYPASS  
CHIME  
1
4
7
2
5
8
0
3
6
9
#
B
1. Press the 7 INSTANT and 9 CHIME keys at the  
same time until the display flashes double dashes  
(- -), then release.  
INSTANT  
READY  
C
D
2. Enter the 4-digit security code that matches a valid  
user code already programmed into your control  
panel. Do NOT use the Duress Code. There will be  
no display of the numbers you pressed.  
5828V-00-006-V0  
5828V Keypad with Front Cover Removed  
 
Do NOT use the 5828/5828V to put the LYNX into  
Speaker Phone mode.  
GENERAL NOTES  
If the keypad is on battery power, it will go into  
battery-saver mode (become inactive) in 15 seconds  
with no key presses, even if exit delay is set to a  
longer time period.  
There is no audio indication when you turn on or off  
lights (X10) using the 5828V.  
A wireless keypad low battery condition is displayed  
as BATand 00on the 5828/5828V keypad.  
You would have to press the [] key to view (or hear)  
the new status of the security system.  
Anticipated battery life of the keypad batteries is 1.5  
years.  
When arming in the MAXIMUM mode, the keypad  
will indicate AWAY INSTANT.When arming in  
the INSTANT mode, the keypad will indicate STAY  
INSTANT.”  
Do NOT use the 5828V for silent panic operation  
because the keypad itself is not silent.  
Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with  
your security system. Your Honeywell security system is not designed for use with any device that may be attached to  
your security system's keypad or other communicating bus if Honeywell has not approved such device for use with your  
security system. Use of any such unauthorized device may cause damage or compromise the performance of your  
security system and affect the validity of your Honeywell limited warranty. When you purchase devices that have been  
manufactured or approved by Honeywell, you acquire the assurance that these devices have been thoroughly tested to  
ensure optimum performance when used with your Honeywell security system.  
ONE YEAR LIMITED WARRANTY  
Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 165 Eileen Way,  
Syosset, New York 11791, warrants its security equipment (the "product") to be free from defects in materials and  
workmanship for one year from date of original purchase, under normal use and service. Seller's obligation is limited to  
repairing or replacing, at its option, free of charge for parts, labor, or transportation, any product proven to be defective  
in materials or workmanship under normal use and service. Seller shall have no obligation under this warranty or  
otherwise if the product is altered or improperly repaired or serviced by anyone other than the Seller. In case of defect,  
contact the security professional who installed and maintains your security equipment or the Seller for product repair.  
This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. THERE ARE NO  
EXPRESS WARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED WARRANTIES,  
OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION WITH THIS PRODUCT, INCLUDING ANY  
IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,  
ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. ANY  
ACTION FOR BREACH OF ANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, MUST BE BROUGHT WITHIN 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO  
CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR  
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF  
LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE  
OR FAULT. Some states do not allow limitation on how long an implied warranty lasts or the exclusion or limitation of  
incidental or consequential damages, so the above limitation or exclusion may not apply to you.  
Seller does not represent that the product may not be compromised or circumvented; that the product will prevent any  
personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide  
adequate warning or protection. Buyer understands that a properly installed and maintained alarm may only reduce the  
risk of a burglary, robbery, fire or other events occurring without providing an alarm, but it is not insurance or a guaran-  
tee that such will not occur or that there will be no personal injury or property loss as a result. CONSEQUENTLY,  
SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS  
BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE,  
WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED  
WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL  
NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE  
AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty gives you specific legal rights, and you may also have  
other rights, which vary from state to state. No increase or alteration, written or verbal, to this warranty is authorized.  
- 3 -  
 
FCC STATEMENT  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device  
may not cause harmful interference, and (2) This device must accept any interference received, including interference  
that may cause undesired operation.  
165 Eileen Way, Syosset, New York 11791  
Copyright © 2004 Honeywell International Inc.  
ÊK0021V2*Š  
K0021V2 2/06 Rev. A  
 

Graco Baby Swing PD171513B User Manual
Hotpoint Dishwasher 150950 4 User Manual
HP Hewlett Packard Personal Computer 743uk User Manual
HP Hewlett Packard Server 712317001 User Manual
HP Hewlett Packard Telephone Internet Handset User Manual
Humminbird Fish Finder 1197C SI User Manual
Hunter Fan Fan 23951 User Manual
Hypertec Carrying Case 3704 User Manual
ICTC Holdings Corporation Paint Sprayer 1000MD User Manual
Impex Home Gym MD 2109 User Manual