IBM Computer Drive 19K4206PT1 User Manual

IBM USB  
Portable CD-ROM Drive  
User's Guide  
 
Contents  
Registering your option  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
About this book  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
Part 1: Installation and usage guide . . . . . . . . . . . . . . . . 1-1  
Part 2: Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1  
Appendix A. Help and service information . . . . . . . . . . . . . . . . . 2-1  
Online technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1  
Telephone technical support . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1  
Appendix B. Product warranties and notices . . . . . . . . . . . . . . . . 2-2  
Warranty Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2  
Notices  
Trademarks  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11  
Electronic emission notices  
Japanese statement of compliance for products less than or equal to 20 A per  
phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15  
. . . . . . . . . . . . . . . . . . . . . . . . . . 2-12  
Copyright IBM Corp. 2000  
iii  
 
Registering your option  
Thank you for purchasing this IBMproduct. Please take a few moments to register  
your product and provide us with information that will help IBM to better serve you in  
the future. Your feedback is valuable to us in developing products and services that  
are important to you, as well as in developing better ways to communicate with you.  
Register your option on the IBM Web site at:  
IBM will send you information and updates on your registered product unless you  
indicate on the Web site questionnaire that you do not want to receive further  
information.  
About this book  
This manual contains instructions for installing and using your IBMUSB Portable  
CD-ROM Drive. The manual is divided into two parts:  
Part 1:  
Installation and usage guide  
This section contains the product description, installation instructions, and  
usage information in the following languages:  
English  
German  
French  
Spanish  
Italian  
Brazilian Portuguese  
Japanese  
Part 2:  
Appendixes  
This section contains help and service information, the product warranties,  
and notices.  
Note: The illustrations in this manual might be slightly different from your hardware.  
iv USB Portable CD-ROM Drive  
 
Part 1: Installation and usage guide  
This guide contains the product description, installation instructions, and product use  
information.  
Product description  
The IBM USB Portable CD-ROM Drive is a slimline CD-ROM drive that attaches  
quickly and conveniently to your IBM ThinkPadcomputer through one simple  
connection.  
In addition to this book, the option package includes:  
IBM USB Portable CD-ROM Drive  
USB cable  
Audio cable  
Carrying case  
IBM USB Portable CD-ROM Drive Option Diskette  
Laser Safety Guide for CD-ROMs  
Hardware and software requirements  
You must have the following hardware included on your IBM ThinkPad computer in  
order to use this option:  
An available USB port  
A USB Universal Host Controller Interface (UHCI) Controller  
Note: To determine what type of USB Controller is included on your computer,  
follow these steps.  
1. Click Start Settings Control Panel.  
2. Double-click System.  
3. Click the Device Manager tab.  
4. In the list of devices, click Universal Serial Bus Controller.  
5. Confirm whether the controller type is UHCI or another type.  
Your computer must have one of the following operating systems to use this option:  
MicrosoftWindows98  
Microsoft Windows 2000 Professional  
Copyright IBM Corp. 2000  
1-1  
 
Front view of the drive  
Refer to the following illustration to locate controls.  
ꢀ1ꢁBusy indicator  
ꢀ2ꢁStop button  
This green light glows steadily when the power is turned on  
and blinks when the drive is active.  
Use this to stop playback of an audio CD (for details on  
using the audio control buttons, see Using the CD-ROM  
drive audio player functionson page 1-4).  
ꢀ3ꢁPlay button  
Use this to begin playback of an audio CD (for details on  
using the audio control buttons, see Using the CD-ROM  
drive audio player functionson page 1-4).  
Rear view of the drive  
Refer to the following illustration to locate controls and connectors.  
ꢀ1ꢁCover release  
Pull this forward to open the CD-ROM drive cover and  
load a CD.  
ꢀ2ꢁVolume control  
Use this to adjust the volume output to your headphones or  
speakers.  
ꢀ3ꢁAudio output jack  
ꢀ4ꢁUSB connector  
Plug in headphones or the included audio cable here.  
Plug the USB cable into this connector.  
1-2 USB Portable CD-ROM Drive  
 
Connecting the CD-ROM drive to your  
computer  
Follow these instructions to connect the CD-ROM drive.  
1. Locate the USB cable included with this option. One connector on the USB  
cable is smaller than the other and has two small buttons on each side of it.  
2. Squeeze the two buttons on the smaller connector and attach that end of the USB  
cable to the USB connector on the back of the CD-ROM drive, as shown below.  
Make sure that the metal plate on the smaller connector is facing up when you  
plug it into the USB connector on the CD-ROM drive.  
3. Plug the larger end of the USB cable into the USB port on your computer.  
4. You can plug a set of headphones into the audio output jack (see ꢀ3ꢁ in the rear  
view illustration on page 1-2) in order to listen to audio CDs. Alternatively, if  
you want to listen to audio on your ThinkPad speakers, plug one end of the  
included audio cable into the audio output jack on the CD-ROM drive, and plug  
the other end of the audio cable into either the microphone jack or the line-in jack  
on your ThinkPad computer. This will route the audio to your ThinkPad  
speakers.  
Installing the device driver  
To install the device driver, follow the instructions that correspond to your operating  
system.  
Part 1: Installation and usage guide 1-3  
 
Windows 98  
Follow these instructions to install the device driver for Windows 98.  
1. After you have attached the CD-ROM drive to your computer, turn on your  
computer if it is not turned on already.  
2. In the New Hardware Wizard for IBM USB Portable CD-ROM Drive window,  
click Next.  
3. Click to select the Search for the best driver for your device check box.  
4. Insert the IBM USB Portable CD-ROM Drive Option Diskette into your diskette  
drive.  
5. Click to select the Floppy disk drive check box.  
6. Click Next twice.  
7. Click Finish to complete the device driver installation.  
You can now use the CD-ROM drive with Windows 98.  
Windows 2000  
The Windows 2000 operating system includes a USB device driver. The operating  
system recognizes the CD-ROM drive as soon as it is attached and uses the correct  
device driver. The device driver included on the IBM USB Portable CD-ROM Drive  
Option Diskette is not required for Windows 2000.  
Using the CD-ROM drive audio player  
functions  
There are two ways to use the CD-ROM drive to play audio CDs. You can use the  
Microsoft Windows CD Player, with which you can control the CD playback on your  
computer screen. You can also use the two audio control buttons on the front of the  
CD-ROM drive.  
Note: You must close the Microsoft Windows CD Player in order to use the control  
buttons on the front of the CD-ROM drive. The buttons will not work while the  
Microsoft Windows CD Player is running.  
Although there are only two control buttons on the front of the CD-ROM drive, you  
can use those two buttons to perform all the major functions of a normal CD player.  
Refer to the following table to determine what sequence of actions you need to take in  
order to perform each function.  
1-4 USB Portable CD-ROM Drive  
 
To perform this function:  
Do this:  
Play  
When an audio CD is first loaded, push the Play  
button to initiate playback from the beginning of  
the first track.  
Pause  
When an audio CD is playing, push the Stop  
button to pause playback. After pausing, push the  
Play button to resume playback from the same  
position.  
Note: After 32 seconds in Pause, the CD-ROM  
drive will enter Standby mode to conserve  
power.  
Stop  
Push the Stop button twice to stop playback.  
Note: If you begin playback after pushing the  
Stop button twice, playback will begin at  
the first track again.  
Next Track  
While the CD is playing, push the Play button  
once.  
Previous Track  
If the current track has been playing less than 10  
seconds, press and hold the Play button for 2.5  
seconds and then release.  
Return to Start of Current Track  
Random Track Selection  
If the current track has been playing more than 10  
seconds, press and hold the Play button for 2.5  
seconds and then release.  
Press and hold the Play and Stop buttons together  
for more than one second while the CD is playing.  
To return to sequential play, push the Stop button.  
Uninstalling the Windows 98 device driver  
If you have installed the Windows 98 device driver and need to uninstall it, follow  
these instructions.  
1. Insert the IBM USB Portable CD-ROM Drive Option Diskette into the diskette  
drive.  
2. Click Start.  
3. Select Run.  
4. Click Browse.  
5. From the Look in menu, click 3 1/2 Floppy (A:).  
6. Double-click UnUsbdrv.exe.  
7. Click Yes to confirm uninstallation.  
8. Click Yes to restart your computer.  
Part 1: Installation and usage guide 1-5  
 
The device driver is now uninstalled. Your computer will not recognize the CD-ROM  
drive when it is connected to the computer unless you reinstall the device driver.  
Disconnecting and reconnecting the CD-ROM  
drive  
Hot plugging is supported on the connection between the USB cable and your  
computer. This means that the CD-ROM drive USB cable can be disconnected from  
and reconnected to your computer whether the computer is on or off.  
Attention  
The connection between the USB cable and the CD-ROM drive itself does not  
support hot plugging. If you disconnect the USB cable from the CD-ROM drive  
while the USB cable is attached to your computer, it might cause damage to the  
CD-ROM drive.  
To avoid damaging the CD-ROM drive, turn off the CD-ROM drive before  
disconnecting the USB cable from your computer. To disconnect the CD-ROM drive  
from the computer, unplug the USB cable from the computer. To reconnect the  
CD-ROM drive, reconnect the USB cable to the computer.  
Attention  
Do not disconnect and reconnect the USB cable in rapid succession or the  
CD-ROM drive might not load properly. After disconnecting the USB cable, wait  
at least 10 to 20 seconds, or until the hourglass icon stops displaying, before  
reconnecting the USB cable.  
1-6 USB Portable CD-ROM Drive  
 

Grizzly Air Compressor G0471 User Manual
GT Mobile Cell Phone I801 User Manual
Haier Flat Panel Television HLH266BB User Manual
HP Hewlett Packard Computer Monitor 2159V User Manual
Humminbird Fish Finder MATRIX 12 User Manual
Hunter Fan Fan 23920 User Manual
Husqvarna Lawn Mower 532424761R1 User Manual
Husqvarna Lawn Mower Accessory 966659501 User Manual
IBM CRT Television R30 User Manual
Image Hot Tub IMHS63100 User Manual